Dark-blue conductive polyurethane ESD cleanroom chair

クリーンルーム家具 · ステンレス製品

ESD クリーンルームの椅子

A dark-blue conductive polyurethane cleanroom chair with a continuous grounded seat-to-floor path, conductive casters, drag chain and adjustable seat, back and footring controls.

Conductive molded polyurethane
Continuous seat-to-floor grounding path
Conductive twin-wheel casters
Visible drag-chain backup connection

見積もりリクエスト製品案内

商品紹介

The ESD cleanroom chair uses dark-blue conductive self-skinned polyurethane for the seat and back, electrically bonded through the control plate, metal column and polished aluminum base. Five black conductive casters maintain rolling contact with a suitable static-control floor, while a braided drag chain provides a second visible ground path. The sealed pneumatic height control, adjustable backbar and stainless footring retain the ergonomic functions required at electronics benches without using fabric upholstery or loose grounding wires across the seating surface.

主要な特徴

Conductive integral-skin polyurethane links the operator contact surfaces to the metal support path without stitched covers.

Bonding tabs bridge the seat control, pneumatic column and aluminum base to avoid an insulated mechanical break.

Five conductive twin-wheel casters provide mobile floor contact, supplemented by a replaceable braided drag chain.

Seat height, back position and footring elevation adjust while the designated grounding route remains connected.

お客様の製品に関する懸念事項

Static-sensitive clean work requires seating that combines non-shedding surfaces with a traceable electrical path through every adjustable and mobile component.

A cleanable polyurethane chair can still isolate the operator if the seat compound is not conductive.Conductive integral-skin polyurethane forms the first link in the designated seat-to-floor path.

Painted brackets or lubricated pivots can interrupt continuity between the seat and base.Metal bonding tabs deliberately bridge the control plate, column socket and polished base.

Ordinary plastic casters insulate the chair as it moves across the protected work area.Five conductive twin-wheel casters maintain contact with a compatible static-control floor.

Wear or dirt at one rolling contact can make the discharge route difficult to see.A braided drag chain supplies a conspicuous secondary floor contact that is simple to inspect and replace.

典型的な用途

Semiconductor device handling benchesPrinted circuit assembly cleanroomsElectro-optical module productionStatic-sensitive medical electronics assemblyControlled battery component inspection

技術的なパラメータ

Typical configurable specifications for a conductive polyurethane ESD cleanroom chair are listed below.

コア材料	Dark-blue conductive self-skinned polyurethane seat and back, bonded metal controls, polished aluminum base and conductive casters
パネルの厚さ	40 mm nominal molded conductive seat thickness
有効幅	470 mm usable seat width
最大長さ	1040 mm maximum overall height with the backrest raised
鋼鉄の厚さを直面する	2.0 mm stainless footring tube and bonding-tab thickness
コア密度	420–560 kg/m³ for conductive self-skinned polyurethane
熱伝導率	0.040–0.060 W/(m·K) for conductive molded polyurethane
表面仕上げ	Dark-blue conductive integral-skin polyurethane, polished aluminum base, black conductive casters and braided ground chain
ジョイントタイプ	Electrically bonded seat-control-column-base assembly with conductive caster stems and replaceable drag-chain lug
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Conductive glides in place of castersLow or high seat-height rangeGround continuity test pointAdjustable ESD arm supports

Planning a ESD Cleanroom Chair specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する