Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Z Chaise ESD Cleanroom
A dark-blue conductive polyurethane cleanroom chair with a continuous grounded seat-to-floor path, conductive casters, drag chain and adjustable seat, back and footring controls.
- Conductive molded polyurethane
- Continuous seat-to-floor grounding path
- Conductive twin-wheel casters
- Visible drag-chain backup connection
Introduction de produit
The ESD cleanroom chair uses dark-blue conductive self-skinned polyurethane for the seat and back, electrically bonded through the control plate, metal column and polished aluminum base. Five black conductive casters maintain rolling contact with a suitable static-control floor, while a braided drag chain provides a second visible ground path. The sealed pneumatic height control, adjustable backbar and stainless footring retain the ergonomic functions required at electronics benches without using fabric upholstery or loose grounding wires across the seating surface.
Key Features
Bonding tabs bridge the seat control, pneumatic column and aluminum base to avoid an insulated mechanical break.
Five conductive twin-wheel casters provide mobile floor contact, supplemented by a replaceable braided drag chain.
Seat height, back position and footring elevation adjust while the designated grounding route remains connected.
Préoccupations du client produit
Static-sensitive clean work requires seating that combines non-shedding surfaces with a traceable electrical path through every adjustable and mobile component.
A cleanable polyurethane chair can still isolate the operator if the seat compound is not conductive.Conductive integral-skin polyurethane forms the first link in the designated seat-to-floor path.
Painted brackets or lubricated pivots can interrupt continuity between the seat and base.Metal bonding tabs deliberately bridge the control plate, column socket and polished base.
Ordinary plastic casters insulate the chair as it moves across the protected work area.Five conductive twin-wheel casters maintain contact with a compatible static-control floor.
Wear or dirt at one rolling contact can make the discharge route difficult to see.A braided drag chain supplies a conspicuous secondary floor contact that is simple to inspect and replace.
Les applications typiques
Semiconductor device handling benchesPrinted circuit assembly cleanroomsElectro-optical module productionStatic-sensitive medical electronics assemblyControlled battery component inspection
Paramètres techniques
Typical configurable specifications for a conductive polyurethane ESD cleanroom chair are listed below.
| Matériaux de base | Dark-blue conductive self-skinned polyurethane seat and back, bonded metal controls, polished aluminum base and conductive casters |
|---|---|
| Panneau épaisseur | 40 mm nominal molded conductive seat thickness |
| Largeur effective | 470 mm usable seat width |
| Longueur maximale | 1040 mm maximum overall height with the backrest raised |
| Acier face épaisseur | 2.0 mm stainless footring tube and bonding-tab thickness |
| Densité Core | 420–560 kg/m³ for conductive self-skinned polyurethane |
| Conductivité thermique | 0.040–0.060 W/(m·K) for conductive molded polyurethane |
| surface finie | Dark-blue conductive integral-skin polyurethane, polished aluminum base, black conductive casters and braided ground chain |
| Type joint | Electrically bonded seat-control-column-base assembly with conductive caster stems and replaceable drag-chain lug |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Conductive glides in place of castersLow or high seat-height rangeGround continuity test pointAdjustable ESD arm supports
Planning a ESD Cleanroom Chair specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
