Dark-blue conductive polyurethane ESD cleanroom chair

클린룸 가구 및 스테인레스 스틸 제품

ESD 클린룸 의자

A dark-blue conductive polyurethane cleanroom chair with a continuous grounded seat-to-floor path, conductive casters, drag chain and adjustable seat, back and footring controls.

Conductive molded polyurethane
Continuous seat-to-floor grounding path
Conductive twin-wheel casters
Visible drag-chain backup connection

견적 요청 제품 찾아보기

상품 소개

The ESD cleanroom chair uses dark-blue conductive self-skinned polyurethane for the seat and back, electrically bonded through the control plate, metal column and polished aluminum base. Five black conductive casters maintain rolling contact with a suitable static-control floor, while a braided drag chain provides a second visible ground path. The sealed pneumatic height control, adjustable backbar and stainless footring retain the ergonomic functions required at electronics benches without using fabric upholstery or loose grounding wires across the seating surface.

주요 기능

Conductive integral-skin polyurethane links the operator contact surfaces to the metal support path without stitched covers.

Bonding tabs bridge the seat control, pneumatic column and aluminum base to avoid an insulated mechanical break.

Five conductive twin-wheel casters provide mobile floor contact, supplemented by a replaceable braided drag chain.

Seat height, back position and footring elevation adjust while the designated grounding route remains connected.

고객 제품 관심사

Static-sensitive clean work requires seating that combines non-shedding surfaces with a traceable electrical path through every adjustable and mobile component.

A cleanable polyurethane chair can still isolate the operator if the seat compound is not conductive.Conductive integral-skin polyurethane forms the first link in the designated seat-to-floor path.

Painted brackets or lubricated pivots can interrupt continuity between the seat and base.Metal bonding tabs deliberately bridge the control plate, column socket and polished base.

Ordinary plastic casters insulate the chair as it moves across the protected work area.Five conductive twin-wheel casters maintain contact with a compatible static-control floor.

Wear or dirt at one rolling contact can make the discharge route difficult to see.A braided drag chain supplies a conspicuous secondary floor contact that is simple to inspect and replace.

일반적인 응용 프로그램

Semiconductor device handling benchesPrinted circuit assembly cleanroomsElectro-optical module productionStatic-sensitive medical electronics assemblyControlled battery component inspection

기술 매개변수

Typical configurable specifications for a conductive polyurethane ESD cleanroom chair are listed below.

핵심 재료	Dark-blue conductive self-skinned polyurethane seat and back, bonded metal controls, polished aluminum base and conductive casters
패널 두께	40 mm nominal molded conductive seat thickness
유효 폭	470 mm usable seat width
최대 길이	1040 mm maximum overall height with the backrest raised
강철 면면 두께	2.0 mm stainless footring tube and bonding-tab thickness
코어 밀도	420–560 kg/m³ for conductive self-skinned polyurethane
열전도도 (Thermal Conductivity)	0.040–0.060 W/(m·K) for conductive molded polyurethane
표면 마무리	Dark-blue conductive integral-skin polyurethane, polished aluminum base, black conductive casters and braided ground chain
접합 유형	Electrically bonded seat-control-column-base assembly with conductive caster stems and replaceable drag-chain lug
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Conductive glides in place of castersLow or high seat-height rangeGround continuity test pointAdjustable ESD arm supports

Planning a ESD Cleanroom Chair specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.