Complete cleanroom door status sensor pair with brushed stainless faces and aligned magnet

クリーンルーム管理 · 環境モニタリングシステム

ドアステータスセンサー

A sealed magnetic proximity contact that reports the true open or closed position of a cleanroom door to interlock, pressure and monitoring systems.

Non-Contact Magnetic Sensing
Flush Cleanroom Installation
Sealed Stainless Face
Open-Closed Signal Output

見積もりリクエスト製品案内

商品紹介

The cleanroom door status sensor uses a reed or solid-state magnetic element in the frame and a permanent magnet in the moving leaf. Because the two parts do not touch, the device avoids exposed mechanical levers and tolerates frequent door cycles. Flush stainless or smooth polymer housings sit nearly level with the door surfaces for easier wiping. Normally open, normally closed or changeover contacts provide a direct input to airlock interlocks, room pressure controls, alarms and access monitoring.

主要な特徴

Non-contact switching avoids the wear and debris associated with mechanical limit levers.

Flush or low-profile bodies preserve smooth door and frame surfaces for routine cleaning.

Clearly matched sensor and magnet geometry provides repeatable switching distance.

Dry-contact or solid-state outputs connect directly to common PLC, DDC and interlock inputs.

お客様の製品に関する懸念事項

Reliable door status depends on alignment, switching gap and cable protection rather than only the electrical contact type.

A door looks closed but the sensor remains open because the magnet is misaligned.Matched flush pockets and alignment marks position the magnet within the specified operating gap.

A protruding limit switch traps residue on the cleanroom frame.A flush non-contact sensor removes exposed actuator arms and horizontal ledges.

Repeated door movement breaks an unprotected cable at the frame.Fixed frame wiring and sealed rear entry keep the cable away from hinges and moving hardware.

The interlock cannot distinguish a cut cable from a closed door.Normally closed or supervised circuits allow open-circuit wiring faults to create a detectable abnormal state.

典型的な用途

パーソナルエアロックドアMaterial-transfer airlock doorsCleanroom swing and sliding doorsPass box door monitoring

技術的なパラメータ

Typical materials and dimensions for a flush cleanroom magnetic door status sensor are shown below.

コア材料	Reed or solid-state magnetic element in 304 stainless steel or glass-filled polymer body
パネルの厚さ	12-25 mm sensor body depth
有効幅	15-30 mm face width
最大長さ	Up to 100 mm sensor body length
鋼鉄の厚さを直面する	0.8-1.2 mm 304 stainless steel faceplate
コア密度	7900-8030 kg/m³ for stainless face components
熱伝導率	14-17 W/(m·K) for 304 stainless steel face
表面仕上げ	Brushed stainless steel or smooth white polymer with concealed fixing points
ジョイントタイプ	Paired recessed sensor and magnet with sealed pigtail or rear screw terminal
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Recessed or surface mountNormally open, closed or changeover contactArmored cable leadWide-gap magnet

Planning a Door Status Sensor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する