Floor-mounted stainless cleanroom mop sink with blue bucket grate

クリーンルーム家具 · ステンレス製品

クリーンルームモップシンク

A low-level Type 304 stainless janitorial basin with a coved 16-gauge bowl, removable blue polymer grate, drop-front apron, three-sided splash protection and 76 mm waste.

Low-level bucket access
Coved 16-gauge bowl
Removable blue support grate
Large 76 mm waste

見積もりリクエスト製品案内

商品紹介

The cleanroom mop sink creates a low washing and discharge point for mop heads, buckets and floor-cleaning tools without requiring operators to lift a full pail to bench height. Its Type 304 stainless bowl is formed with generous internal radii and TIG-welded into a three-sided splash enclosure. A shallow drop-front apron shortens the bucket lifting path, while a removable blue polypropylene grate supports pails above the outlet. The flat basket strainer and 76 mm waste handle lint-bearing wash water, and an attached wall clip stabilizes the floor-mounted body.

主要な特徴

The low drop-front loading edge reduces the height required to place or empty a filled cleaning bucket.

A removable perforated blue grate holds pails above the waste and lifts out for direct bowl cleaning.

Generous coved corners and blended TIG welds avoid sharp internal intersections around dirty wash water.

Rear and side splash panels contain mop rinse spray without adding a separate wall-mounted upstand.

お客様の製品に関する懸念事項

Janitorial teams need to rinse mops and discharge buckets close to floor level without splashing adjacent finishes or blocking a small cleaning room.

Lifting a full bucket into a conventional sink strains the operator and spills wash water.The low floor-mounted bowl and drop-front edge shorten the lifting path.

Mop fibres and debris collect around a small domestic drain.A removable flat basket strainer feeds a 76 mm waste sized for janitorial discharge.

Buckets placed directly over the outlet stop drainage during refilling or rinsing.The raised blue grate supports the bucket while leaving a drainage path beneath it.

Square fabricated corners retain dirty water after the sink is emptied.The sloped bowl floor and large coved radii direct residual water toward the strainer.

典型的な用途

Cleanroom janitorial closetsControlled corridor cleaning stationsPharmaceutical support washroomsHigh-care food sanitation roomsMedical-device floor-care areas

技術的なパラメータ

Typical configurable specifications for a floor-mounted stainless cleanroom mop sink are listed below.

コア材料	Type 304 stainless deep coved basin with removable blue polypropylene bucket grate and stainless basket strainer
パネルの厚さ	1.5 mm 16-gauge bowl, splash panels and apron
有効幅	560 mm clear low-level washing width
最大長さ	650 mm maximum front-to-back dimension including rear splash panel
鋼鉄の厚さを直面する	1.5 mm Type 304 stainless exposed basin surfaces
コア密度	タイプ 304 のステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	タイプ 304 ステンレス鋼 14 〜 17 W / （m · K）
表面仕上げ	Satin-brushed stainless exterior with smooth coved bowl and blue removable polymer grate
ジョイントタイプ	Fully welded floor basin with rear wall clip, three-sided splash enclosure and 76 mm basket-strainer waste
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Hose bracket and mop hangerWall-mounted swivel mixerType 316 stainless bowlStainless bucket grate

Planning a Cleanroom Mop Sink specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する