クリーンルームの清掃 · 消毒 · 滅菌

クリーンルームの衣料品滅菌器

A vacuum-steam sterilizer configured for porous cleanroom garments and textile packs, with controlled air removal, saturated-steam exposure, drying, and barrier transfer options.

Pulsed vacuum promotes steam penetration into porous garment packs
Controlled drying reduces retained moisture after exposure
Double-door options support clean-side unloading workflows

見積もりリクエスト製品案内

商品紹介

This cleanroom garment sterilizer is built for reusable coveralls, hoods, boots, and compatible porous cleanroom textiles. Chamber dimensions and loading racks are arranged to avoid over-compression, while dedicated garment recipes control conditioning and drying. Single-door and double-door barrier versions are available for pharmaceutical production and controlled laundry workflows.

主要な特徴

Porous-load pre-vacuum steam cycles

Jacketed stainless-steel chamber

Sterile filtered-air admission

Programmable post-vacuum drying

Load-specific garment racks or baskets

Automatic interlocked door system

Leak test and cycle monitoring

Electronic batch records and alarm history

お客様の製品に関する懸念事項

Dense or tightly compressed garments can trap air and moisture. Cycle performance therefore depends on breathable packaging, defined folding and loading patterns, adequate spacing, steam quality, vacuum integrity, and sufficient drying time.

How is steam penetration improved?Pulsed vacuum conditioning removes air before exposure, while validated pack density and rack spacing preserve steam access.

How is wet-load risk reduced?Heated jackets, post-vacuum drying, filtered-air breaks, and a load-specific dry phase remove retained moisture.

Can clean and non-clean sides be separated?A double-door barrier model interlocks loading and unloading doors to support one-way transfer.

How are cycles documented?Time, chamber temperature, pressure, vacuum stages, alarms, and completion state can be stored and exported.

典型的な用途

Reusable cleanroom coverallsCleanroom hoods and bootsPorous textile packsPharmaceutical gowning operationsControlled laundry facilitiesBiotechnology production support

技術的なパラメータ

The sterilizer uses a jacketed stainless chamber, vacuum pump, sterile air admission filter, condensate control, and load-specific recipes. Conditioning removes air from folded textile packs before saturated-steam exposure; post-vacuum drying and filtered-air breaks prepare the load for handling.

コア材料	316L or 304 stainless-steel chamber with garment racks and sterile-air filter housing
パネルの厚さ	40–80 mm insulated cabinet panels
有効幅	700–1300 mm equipment width
最大長さ	1600–2800 mm maximum external dimension
鋼鉄の厚さを直面する	1.0–1.5 mm stainless-steel facing
コア密度	60–100 kg/m³ high-temperature mineral insulation
熱伝導率	0.035–0.050 W/(m·K)
表面仕上げ	Brushed external stainless steel with smooth polished chamber interior
ジョイントタイプ	Welded chamber seams with gasketed interlocked door and sanitary filtered-air connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or double interlocked doorsGarment racks and porous-load basketsIntegral clean-steam generatorSterile-air filter integrity portsLoading carts and transfer trolleysPrinter and network data interfaceChamber sizes and garment recipes

Planning a Cleanroom Garment Sterilizer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する