클린룸 청소, 소독 및 소독

클린룸 의류 살균기

A vacuum-steam sterilizer configured for porous cleanroom garments and textile packs, with controlled air removal, saturated-steam exposure, drying, and barrier transfer options.

Pulsed vacuum promotes steam penetration into porous garment packs
Controlled drying reduces retained moisture after exposure
Double-door options support clean-side unloading workflows

견적 요청 제품 찾아보기

상품 소개

This cleanroom garment sterilizer is built for reusable coveralls, hoods, boots, and compatible porous cleanroom textiles. Chamber dimensions and loading racks are arranged to avoid over-compression, while dedicated garment recipes control conditioning and drying. Single-door and double-door barrier versions are available for pharmaceutical production and controlled laundry workflows.

주요 기능

Porous-load pre-vacuum steam cycles

Jacketed stainless-steel chamber

Sterile filtered-air admission

Programmable post-vacuum drying

Load-specific garment racks or baskets

Automatic interlocked door system

Leak test and cycle monitoring

Electronic batch records and alarm history

고객 제품 관심사

Dense or tightly compressed garments can trap air and moisture. Cycle performance therefore depends on breathable packaging, defined folding and loading patterns, adequate spacing, steam quality, vacuum integrity, and sufficient drying time.

How is steam penetration improved?Pulsed vacuum conditioning removes air before exposure, while validated pack density and rack spacing preserve steam access.

How is wet-load risk reduced?Heated jackets, post-vacuum drying, filtered-air breaks, and a load-specific dry phase remove retained moisture.

Can clean and non-clean sides be separated?A double-door barrier model interlocks loading and unloading doors to support one-way transfer.

How are cycles documented?Time, chamber temperature, pressure, vacuum stages, alarms, and completion state can be stored and exported.

일반적인 응용 프로그램

Reusable cleanroom coverallsCleanroom hoods and bootsPorous textile packsPharmaceutical gowning operationsControlled laundry facilitiesBiotechnology production support

기술 매개변수

The sterilizer uses a jacketed stainless chamber, vacuum pump, sterile air admission filter, condensate control, and load-specific recipes. Conditioning removes air from folded textile packs before saturated-steam exposure; post-vacuum drying and filtered-air breaks prepare the load for handling.

핵심 재료	316L or 304 stainless-steel chamber with garment racks and sterile-air filter housing
패널 두께	40–80 mm insulated cabinet panels
유효 폭	700–1300 mm equipment width
최대 길이	1600–2800 mm maximum external dimension
강철 면면 두께	1.0–1.5 mm stainless-steel facing
코어 밀도	60–100 kg/m³ high-temperature mineral insulation
열전도도 (Thermal Conductivity)	0.035–0.050 W/(m·K)
표면 마무리	Brushed external stainless steel with smooth polished chamber interior
접합 유형	Welded chamber seams with gasketed interlocked door and sanitary filtered-air connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or double interlocked doorsGarment racks and porous-load basketsIntegral clean-steam generatorSterile-air filter integrity portsLoading carts and transfer trolleysPrinter and network data interfaceChamber sizes and garment recipes

Planning a Cleanroom Garment Sterilizer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.