Silver-gray antistatic HPL raised floor panel on four pedestal supports

クリーンルームフロアシステム

帯電防止 HPL アクセスフロアを上げました

A removable cement-filled steel access-floor panel finished with antistatic high-pressure laminate for cable access, grounded continuity and durable technical-room service.

Antistatic HPL Finish
Removable 600 mm Modules
Grounded Steel Shell
Underfloor Service Access

見積もりリクエスト製品案内

商品紹介

The antistatic HPL raised access floor combines a welded steel shell, cementitious infill and a factory-laminated high-pressure laminate surface. Square panels rest on adjustable steel pedestals and, where required, bolted stringers, forming an accessible void for cables and utilities. The metal panel body and understructure are bonded into the grounding network, while the antistatic HPL limits charge accumulation at the walking surface. Integral edge trim protects the laminate and allows individual panels to be lifted without disturbing adjacent modules.

主要な特徴

Antistatic HPL provides a sealed, abrasion-resistant walking surface with a typical 1×10⁹–1×10¹⁰ Ω resistance range.

A welded steel shell and cementitious fill give the module stiffness for rolling equipment and concentrated loads.

Each 600 mm panel remains removable for inspection or changes within the underfloor service zone.

Continuous metal-to-metal bonding through panels, pedestals and grounding conductors supports static control.

お客様の製品に関する懸念事項

A technical-room floor must provide service access and static control without loose surface tiles or poorly grounded panel joints.

Cable changes require cutting or demolishing a fixed finished floor.Individual 600 mm modules lift from the pedestal grid to expose the service void.

Standard laminate allows uncomfortable static buildup around sensitive equipment.Antistatic HPL and a bonded metal understructure provide a controlled path for accumulated charge.

Applied surface tiles peel at panel edges during repeated access.Factory lamination and integral edge trim protect the HPL when panels are lifted and replaced.

Light panels rock under rolling cabinets or concentrated equipment feet.Cementitious-filled steel construction and optional stringers improve stiffness across the grid.

典型的な用途

Cleanroom control roomsData and instrumentation roomsLaboratory equipment support areasElectronic manufacturing support spacesBuilding automation and monitoring rooms

技術的なパラメータ

Representative dimensions and material values for an antistatic HPL-faced steel access-floor panel are provided below.

コア材料	Welded formed-steel shell filled with dense cementitious compound
パネルの厚さ	35–41 mm overall panel thickness including HPL finish
有効幅	600 mm nominal modular panel width
最大長さ	600 mm nominal modular panel length
鋼鉄の厚さを直面する	0.7–1.0 mm formed top and bottom steel sheets, depending on load grade
コア密度	Approximately 1900–2200 kg/m³ for the cementitious infill
熱伝導率	Approximately 0.8–1.4 W/(m·K) for the cementitious core
表面仕上げ	0.9–1.6 mm antistatic HPL with sealed decorative face and integral edge trim
ジョイントタイプ	Removable square-edge panels supported on grounded steel pedestals with optional bolted stringers
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Antistatic or dissipative HPL resistance rangeLight, medium or heavy load gradeFreestanding or stringered pedestal gridIntegral grommets, cable cutouts and grounding leads

Planning a Antistatic HPL Raised Access Floor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する