Silver-gray antistatic HPL raised floor panel on four pedestal supports

클린룸 바닥 시스템

정전기 방지 HPL 상승 액세스 바닥

A removable cement-filled steel access-floor panel finished with antistatic high-pressure laminate for cable access, grounded continuity and durable technical-room service.

Antistatic HPL Finish
Removable 600 mm Modules
Grounded Steel Shell
Underfloor Service Access

견적 요청 제품 찾아보기

상품 소개

The antistatic HPL raised access floor combines a welded steel shell, cementitious infill and a factory-laminated high-pressure laminate surface. Square panels rest on adjustable steel pedestals and, where required, bolted stringers, forming an accessible void for cables and utilities. The metal panel body and understructure are bonded into the grounding network, while the antistatic HPL limits charge accumulation at the walking surface. Integral edge trim protects the laminate and allows individual panels to be lifted without disturbing adjacent modules.

주요 기능

Antistatic HPL provides a sealed, abrasion-resistant walking surface with a typical 1×10⁹–1×10¹⁰ Ω resistance range.

A welded steel shell and cementitious fill give the module stiffness for rolling equipment and concentrated loads.

Each 600 mm panel remains removable for inspection or changes within the underfloor service zone.

Continuous metal-to-metal bonding through panels, pedestals and grounding conductors supports static control.

고객 제품 관심사

A technical-room floor must provide service access and static control without loose surface tiles or poorly grounded panel joints.

Cable changes require cutting or demolishing a fixed finished floor.Individual 600 mm modules lift from the pedestal grid to expose the service void.

Standard laminate allows uncomfortable static buildup around sensitive equipment.Antistatic HPL and a bonded metal understructure provide a controlled path for accumulated charge.

Applied surface tiles peel at panel edges during repeated access.Factory lamination and integral edge trim protect the HPL when panels are lifted and replaced.

Light panels rock under rolling cabinets or concentrated equipment feet.Cementitious-filled steel construction and optional stringers improve stiffness across the grid.

일반적인 응용 프로그램

Cleanroom control roomsData and instrumentation roomsLaboratory equipment support areasElectronic manufacturing support spacesBuilding automation and monitoring rooms

기술 매개변수

Representative dimensions and material values for an antistatic HPL-faced steel access-floor panel are provided below.

핵심 재료	Welded formed-steel shell filled with dense cementitious compound
패널 두께	35–41 mm overall panel thickness including HPL finish
유효 폭	600 mm nominal modular panel width
최대 길이	600 mm nominal modular panel length
강철 면면 두께	0.7–1.0 mm formed top and bottom steel sheets, depending on load grade
코어 밀도	Approximately 1900–2200 kg/m³ for the cementitious infill
열전도도 (Thermal Conductivity)	Approximately 0.8–1.4 W/(m·K) for the cementitious core
표면 마무리	0.9–1.6 mm antistatic HPL with sealed decorative face and integral edge trim
접합 유형	Removable square-edge panels supported on grounded steel pedestals with optional bolted stringers
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Antistatic or dissipative HPL resistance rangeLight, medium or heavy load gradeFreestanding or stringered pedestal gridIntegral grommets, cable cutouts and grounding leads

Planning a Antistatic HPL Raised Access Floor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.