Airtight cleanroom cable gland with stainless body and black compression seal

クリーンルーム照明 · 電気機器

密気ケーブルグランド

A compression fitting that seals around a cable sheath and closes the cleanroom panel penetration with a smooth stainless interface.

360-Degree Cable Compression
Stainless Hygienic Body
Panel-Side Sealing Washer
Strain-Relief Grip

見積もりリクエスト製品案内

商品紹介

The airtight gland passes a power, control or data cable through an enclosure or cleanroom panel without leaving an annular air path. Tightening the cap compresses an elastomer insert uniformly around the cable jacket while a second gasket seals the gland body to the mounting surface. The external profile is rounded and compact, with no split threads exposed to the cleaning area.

主要な特徴

A circumferential insert seals directly against the cable outer sheath.

The body-to-panel washer closes the penetration independently of cable compression.

Strain relief transfers pull load away from internal terminals.

A smooth rounded cap supports direct wiping around the entry point.

Different inserts accommodate single cables, multiple small cables or conduit tails.

お客様の製品に関する懸念事項

A cable entry can leak either around the cable or around the gland body, so both sealing interfaces must be controlled.

Air leaks through the gap between cable and drilled hole.The compressed elastomer insert closes uniformly around the cable sheath.

The gland rotates and breaks the panel seal during tightening.A locknut or keyed body retains the gland while the cap is torqued.

Cable movement transfers force to delicate terminals.Integrated strain relief grips the outer jacket before the connection point.

Several small cables require multiple wall penetrations.A multi-hole sealing insert groups compatible cables in one gland body.

典型的な用途

Cleanroom wall penetrationsSealed equipment cabinetsLighting cable entriesInstrumentation feedthroughs

技術的なパラメータ

Typical configurable construction ranges for an airtight cable gland are listed below.

コア材料	SUS304/SUS316L or nickel-plated brass body with silicone, EPDM or compatible elastomer sealing insert
パネルの厚さ	1.0-12.0 mm compatible mounting-panel thickness
有効幅	12-63 mm cable sealing diameter range across gland sizes
最大長さ	Up to 120 mm overall assembled gland length
鋼鉄の厚さを直面する	1.5-3.0 mm stainless gland wall at the threaded body
コア密度	Approximately 1150-1250 kg/m³ for the elastomer compression insert
熱伝導率	0.20-0.30 W/(m·K) for silicone or EPDM sealing material
表面仕上げ	Fine-machined or electropolished stainless with black, white or blue elastomer insert
ジョイントタイプ	Threaded panel bulkhead with body washer, locknut and radially compressed cable-sealing insert
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-cable or multi-cable insertMetric or NPT mounting threadStraight or right-angle formEMC shield-termination version

Planning a Airtight Cable Gland specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する