Airtight cleanroom cable gland with stainless body and black compression seal

클린룸 조명 및 전기 장비

방공 케이블 글랜드

A compression fitting that seals around a cable sheath and closes the cleanroom panel penetration with a smooth stainless interface.

360-Degree Cable Compression
Stainless Hygienic Body
Panel-Side Sealing Washer
Strain-Relief Grip

견적 요청 제품 찾아보기

상품 소개

The airtight gland passes a power, control or data cable through an enclosure or cleanroom panel without leaving an annular air path. Tightening the cap compresses an elastomer insert uniformly around the cable jacket while a second gasket seals the gland body to the mounting surface. The external profile is rounded and compact, with no split threads exposed to the cleaning area.

주요 기능

A circumferential insert seals directly against the cable outer sheath.

The body-to-panel washer closes the penetration independently of cable compression.

Strain relief transfers pull load away from internal terminals.

A smooth rounded cap supports direct wiping around the entry point.

Different inserts accommodate single cables, multiple small cables or conduit tails.

고객 제품 관심사

A cable entry can leak either around the cable or around the gland body, so both sealing interfaces must be controlled.

Air leaks through the gap between cable and drilled hole.The compressed elastomer insert closes uniformly around the cable sheath.

The gland rotates and breaks the panel seal during tightening.A locknut or keyed body retains the gland while the cap is torqued.

Cable movement transfers force to delicate terminals.Integrated strain relief grips the outer jacket before the connection point.

Several small cables require multiple wall penetrations.A multi-hole sealing insert groups compatible cables in one gland body.

일반적인 응용 프로그램

Cleanroom wall penetrationsSealed equipment cabinetsLighting cable entriesInstrumentation feedthroughs

기술 매개변수

Typical configurable construction ranges for an airtight cable gland are listed below.

핵심 재료	SUS304/SUS316L or nickel-plated brass body with silicone, EPDM or compatible elastomer sealing insert
패널 두께	1.0-12.0 mm compatible mounting-panel thickness
유효 폭	12-63 mm cable sealing diameter range across gland sizes
최대 길이	Up to 120 mm overall assembled gland length
강철 면면 두께	1.5-3.0 mm stainless gland wall at the threaded body
코어 밀도	Approximately 1150-1250 kg/m³ for the elastomer compression insert
열전도도 (Thermal Conductivity)	0.20-0.30 W/(m·K) for silicone or EPDM sealing material
표면 마무리	Fine-machined or electropolished stainless with black, white or blue elastomer insert
접합 유형	Threaded panel bulkhead with body washer, locknut and radially compressed cable-sealing insert
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-cable or multi-cable insertMetric or NPT mounting threadStraight or right-angle formEMC shield-termination version

Planning a Airtight Cable Gland specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.