Charcoal wrist strap tester with stainless touch plate three status lamps and cord jack

Produk ESD dan Antistatik

Tester tali pergelangan tangan

The Wrist Strap Tester checks the resistance path through a worn ESD wrist strap and cord, then displays a high, pass or low result for routine personnel grounding verification.

Three-state indication distinguishes high, acceptable and low resistance conditions.
Large stainless touch plate supports a direct operator test routine.
Compact sloped housing keeps the connection and result lamps easy to see.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This compact tester combines a stainless contact plate, a dedicated wrist-cord jack and three vertically arranged result lamps on a sloped front panel. The molded charcoal enclosure can sit on a counter or be adapted for a fixed entry-point position. During a test, the operator connects the worn strap cord and touches the metal plate to complete the measurement path through the skin, band and cord. The separated high, pass and low indications help supervisors identify an open/high-resistance condition or an unexpectedly low-resistance path without interpreting a numerical display.

Fitur utama:

High, pass and low lamps provide an immediate qualitative result.

Brushed-stainless touch plate offers a durable operator contact surface.

Dedicated wrist-strap jack prevents confusion with footwear interfaces.

Sloped front panel improves visibility at counter height.

Compact molded enclosure supports portable or fixed-point use.

Side power connection keeps supply routing away from the touch surface.

Kekhawatiran produk pelanggan

A wrist strap checker must be simple enough for repeated daily use while distinguishing both high-resistance failures and unsafe low-resistance paths.

An operator enters the protected area with an open cord or poor skin contact.The high-result channel identifies a resistance path above the selected acceptance window.

A missing or bypassed current-limiting resistor is overlooked.The low-result channel identifies an unexpectedly low measured path for follow-up inspection.

Personnel misread a complicated numerical display.Three separated lamps communicate high, pass and low outcomes directly.

Inconsistent hand pressure makes testing awkward.The large metal plate provides a generous, stable contact area for the fingertip or palm.

The tester is difficult to see or reach at an entry station.A sloped face and compact footprint suit counter-level or wall-adjacent installation.

Aplikasi yang Tipis

ESD-protected area entry checkpoints.Electronics production shift-start verification.PCB assembly and repair departments.Static-sensitive laboratories and inspection rooms.Supervisor spot checks of wrist strap assemblies.

Parameter teknis

The representative construction below describes a single-circuit touch tester. Pass limits, cord connector, power arrangement and mounting method should be selected to match the established ESD compliance-verification plan.

Bahan inti	Flame-retardant ABS enclosure with electronic resistance-comparison circuit and metal contacts
Ketebalan Panel (Panel Thickness)	2.0–4.0 mm molded housing and front-panel thickness
Efektif lebar	95–160 mm enclosure width
Panjang maksimum	Up to 220 mm overall enclosure depth
Baja menghadap ketebalan	1.0–1.5 mm brushed-stainless touch-plate thickness
Kepadatan inti (core density)	1030–1080 kg/m³ ABS resin density
Konduktivitas Termal (Thermal Conductivity)	0.17–0.22 W/(m·K)
Permukaan selesai	Textured charcoal housing with black sloped panel, silver contact plate and red/green indicator lenses
Jenis Bersama	Single wrist-cord jack and stainless touch plate connected to a three-state resistance comparator
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Fixed or selectable upper resistance limit.Battery, regulated DC or regional adapter input.Banana, snap or application-specific wrist-cord jack.Visual indication with optional audible signal.Bench-top or wall-mount arrangement.Test-result relay or access-control output where required.

Planning a Wrist Strap Tester specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami