Steam separator three-quarter view with polished 316L body, sanitary inline ports and bottom condensate drain

Sistem Utilitas Cleanroom

Pemisah Uap (Steam Separator)

A compact 316L hygienic separator that removes entrained condensate from clean steam before sensitive process equipment and sterilization users.

Removable hygienic baffle
Direct low-point condensate drain
Sanitary clamp or weld interfaces

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Steam Separator is an inline moisture-removal vessel for clean and pure steam services where carried-over droplets can reduce heat-transfer consistency, disturb control components or reach a hygienic point of use. Steam enters through the horizontal inlet and changes direction across a removable internal baffle, allowing the heavier liquid phase to collect in the lower chamber while drier steam exits through the opposing outlet. The fabricated 316L body provides a dedicated top vent and a straight bottom drain connection, and the removable cover permits internal inspection and cleaning without treating the separator as a steam trap or filtration element.

Fitur utama:

Fabricated 316L stainless-steel body and internals

Low-pressure-drop baffle separation principle

Removable top cover for internal inspection

Direct vertical low-point condensate outlet

Separate top connection for air venting

Hygienic clamp or extended weld-end connections

Electropolished internal finish available

Compact inline geometry for horizontal steam mains

Kekhawatiran produk pelanggan

Moisture carried in a clean-steam line must be separated continuously without introducing hard-to-clean internals, stagnant drain geometry or avoidable pressure loss.

Entrained condensate lowers steam dryness at a critical userUse a line-sized baffle chamber that redirects the vapor path and collects the heavier droplets in a dedicated lower section.

Collected liquid can be re-entrained when the drain path is restrictedProvide a straight low-point drain sized for immediate connection to the selected hygienic steam-trap arrangement.

Fixed internals make hygienic inspection and de-rouging difficultRelease the sanitary cover clamp to remove the baffle and expose the product-contact chamber for inspection and cleaning.

Poorly matched connections add dead legs or installation adaptersSelect sanitary clamp or extended tube weld ends to match the clean-steam line size, vent route and condensate connection.

Aplikasi yang Tipis

Clean steam supply to autoclaves and sterilizersPure steam feeds for vessel SIP cyclesAseptic process equipment steam barriersClean steam upstream of control valves or instrumentsHygienic steam services in pharmaceutical and food plants

Parameter teknis

Steam connection size, shell dimensions, design pressure, surface finish, elastomer, vent arrangement and condensate-trap duty are selected for the actual clean-steam load and piping standard.

Bahan inti	316L stainless steel fabricated body, removable baffle, cover, vent and condensate-wetted parts
Ketebalan Panel (Panel Thickness)	Fabricated vessel wall typically 2.0–4.0 mm, selected for body size and design pressure
Efektif lebar	Body outside diameter typically 88.9–141.3 mm across standard sanitary steam sizes
Panjang maksimum	Overall installed height typically up to 532 mm in the standard size range
Baja menghadap ketebalan	Removable baffle and cover components typically 1.5–3.0 mm
Kepadatan inti (core density)	316L stainless steel kepadatan sekitar 8000 kg / m3
Konduktivitas Termal (Thermal Conductivity)	316L stainless steel approximately 15 W/(m·K) at 20°C
Permukaan selesai	Internal finish available to 0.5 µm Ra with electropolishing; external satin finish up to 1.6 µm Ra
Jenis Bersama	ASME BPE sanitary clamp inlet, outlet, drain and vent connections, with extended tube weld ends available
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

12.7–50.8 mm sanitary steam inlet and outlet sizesSanitary clamp or extended tube weld endsElectropolished internal product-contact surfaceProject-selected FDA-compatible cover sealTop automatic air-vent connectionHygienic thermostatic or float-type trap interfaceInsulation and removable stainless claddingAlternative connection sizes and orientations

Planning a Steam Separator specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami