Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Aksesoris Instalasi Cleanroom
Duct Flange Gasket
A closed-cell EPDM rectangular gasket that compresses between mating duct flanges to close air-leak paths around the joint.
- Closed-Cell EPDM
- Four Bolt Holes
- Rectangular Air Opening
- Compressible Cut Edge
Perkenalan produk
The gasket is cut from thick black closed-cell EPDM with a central rectangular air opening and four corner bolt holes. Its broad perimeter compresses between mating duct flanges while the cellular edge accommodates minor surface variation.
Fitur utama:
Four holes align with a simple corner-bolted flange pattern.
A broad sealing land distributes compression around the opening.
The resilient cut edge accommodates minor flange irregularity.
Kekhawatiran produk pelanggan
Rigid or uneven duct flanges require a compressible interface to prevent leakage around the air opening.
Minor flange waviness leaves leakage paths.Compressible EPDM conforms to local surface variation.
Misaligned holes distort the gasket during assembly.The four-hole pattern is cut to the mating flange dimensions.
Thin seals extrude under bolt pressure.Selected thickness and broad sealing land distribute compression.
Open-cell materials absorb moisture.Closed-cell EPDM limits fluid uptake through the gasket body.
Aplikasi yang Tipis
Cleanroom supply ductsExhaust duct jointsAir-handler connectionsRectangular damper flanges
Parameter teknis
Typical construction ranges for a closed-cell EPDM rectangular duct flange gasket are listed below.
| Bahan inti | Black closed-cell EPDM foam or solid EPDM sheet |
|---|---|
| Ketebalan Panel (Panel Thickness) | 3-20 mm gasket thickness |
| Efektif lebar | 20-100 mm sealing-land width |
| Panjang maksimum | Up to 2000 mm one-piece gasket length |
| Baja menghadap ketebalan | 0.50-3.00 mm compatible duct flange sheet thickness |
| Kepadatan inti (core density) | Approximately 100-250 kg/m³ for closed-cell EPDM foam |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.04-0.08 W/(m·K) for closed-cell EPDM |
| Permukaan selesai | Black fine-cell matte cut surface |
| Jenis Bersama | Four-bolt compressed rectangular flange joint |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Solid or closed-cell EPDMAdhesive-backed surfaceCustom bolt patternDie-cut or waterjet-cut profile
Planning a Duct Flange Gasket specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
