Three-quarter view of a black rectangular EPDM duct flange gasket

Aksesori Pemasangan Bilik Bersih

Gasket Flange Saluran

A closed-cell EPDM rectangular gasket that compresses between mating duct flanges to close air-leak paths around the joint.

Closed-Cell EPDM
Four Bolt Holes
Rectangular Air Opening
Compressible Cut Edge

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The gasket is cut from thick black closed-cell EPDM with a central rectangular air opening and four corner bolt holes. Its broad perimeter compresses between mating duct flanges while the cellular edge accommodates minor surface variation.

Ciri-ciri Utama

Closed cells resist direct airflow through the gasket body.

Four holes align with a simple corner-bolted flange pattern.

A broad sealing land distributes compression around the opening.

The resilient cut edge accommodates minor flange irregularity.

Kebimbangan Produk Pelanggan

Rigid or uneven duct flanges require a compressible interface to prevent leakage around the air opening.

Minor flange waviness leaves leakage paths.Compressible EPDM conforms to local surface variation.

Misaligned holes distort the gasket during assembly.The four-hole pattern is cut to the mating flange dimensions.

Thin seals extrude under bolt pressure.Selected thickness and broad sealing land distribute compression.

Open-cell materials absorb moisture.Closed-cell EPDM limits fluid uptake through the gasket body.

Permohonan yang biasa

Cleanroom supply ductsExhaust duct jointsAir-handler connectionsRectangular damper flanges

Parameter teknikal

Typical construction ranges for a closed-cell EPDM rectangular duct flange gasket are listed below.

Bahan Teras	Black closed-cell EPDM foam or solid EPDM sheet
Ketebalan Panel	3-20 mm gasket thickness
Lebar berkesan	20-100 mm sealing-land width
Panjang maksimum	Up to 2000 mm one-piece gasket length
Keluli Menghadapi Ketebalan	0.50-3.00 mm compatible duct flange sheet thickness
Ketumpatan teras	Approximately 100-250 kg/m³ for closed-cell EPDM foam
Kekonduksian Terma	Approximately 0.04-0.08 W/(m·K) for closed-cell EPDM
Kemasan permukaan	Black fine-cell matte cut surface
Jenis Bersatu	Four-bolt compressed rectangular flange joint
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Solid or closed-cell EPDMAdhesive-backed surfaceCustom bolt patternDie-cut or waterjet-cut profile

Planning a Duct Flange Gasket specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami