Sistem Distribusi Udara Cleanroom

Cleanroom Air Transfer Grille

A double-sided door or partition grille with opposed chevron blades that passes pressure-relief air while blocking direct vision between rooms.

No Direct Line of Sight
Low-Resistance Transfer Path
Adjustable Wall Sleeve
Double-Sided Chevron Blades

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom air transfer grille allows passive airflow between adjacent rooms when a pressure difference exists but a ducted transfer branch is unnecessary. Opposed V-shaped aluminum blades overlap through the wall opening, preventing a straight visual path while leaving a broad free area. Matching front and rear frames clamp around the partition, and an adjustable sleeve covers the cut edges of doors or sandwich panels. The removable faces provide access for wiping the blade channels and the interior sleeve.

Fitur utama:

Overlapping chevron blades obscure direct visibility through the partition opening.

A large free area passes pressure-relief air with less resistance than a densely baffled acoustic transfer unit.

The telescopic sleeve adapts one grille set to different cleanroom door and wall thicknesses.

Two removable finished faces leave the internal blade passages accessible from either room.

Kekhawatiran produk pelanggan

A passive transfer opening must relieve room pressure without exposing unfinished partition edges or creating a direct line of sight.

A plain wall opening allows direct visibility and light passage between controlled rooms.Opposed chevron blades overlap the opening while retaining a usable airflow path.

The grille frame does not span the thickness of a sandwich-panel wall or door.An adjustable sleeve bridges the partition and seals both room-side frames to the cutout.

Pressure relief is inadequate because the transfer core has too little free area.Generous blade spacing minimizes resistance for the selected grille width and pressure differential.

Dust remains trapped inside an enclosed double-sided grille.Detachable face frames expose the blade passages and sleeve for cleaning from either side.

Aplikasi yang Tipis

Pressure transfer through cleanroom doorsAir movement between gowning stagesTransfer paths in laboratory partitionsReturn-air relief from small clean support roomsPressure equalization across service corridors

Parameter teknis

Representative material and size ranges for a no-sight cleanroom transfer grille are listed below.

Bahan inti	Profiled aluminum frames and opposed chevron blades with telescopic partition sleeve
Ketebalan Panel (Panel Thickness)	1.2–2.0 mm profiled aluminum blade and frame walls
Efektif lebar	200–800 mm nominal transfer opening width
Panjang maksimum	Up to 800 mm grille width in a single door or wall set
Baja menghadap ketebalan	0.8–1.0 mm optional galvanized-steel telescopic wall sleeve
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the aluminum chevron blade assembly
Konduktivitas Termal (Thermal Conductivity)	Approximately 200–210 W/(m·K) for the aluminum chevron blade assembly
Permukaan selesai	White powder-coated, clear anodized or mill-finished aluminum
Jenis Bersama	Opposed room-side frames joined by an adjustable sleeve and perimeter foam seals
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single face with opposite frame or double grille set25–100 mm adjustable partition sleeveWhite powder coat or clear anodized finishSandwich-panel and cleanroom-door mounting kits

Planning a Cleanroom Air Transfer Grille specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami