Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Acier inoxydable Gowning Bench par
An electropolished Type 304 stainless gowning bench with a parallel-rod seat, recessed welded base and adjustable non-marking glides for open, easy-access footwear changing areas.
- Airflow-through rod seat
- Recessed floor-cleaning base
- Continuous welded construction
- Electropolished Type 304 stainless steel
Introduction de produit
This stainless steel gowning bench uses closely spaced round rods instead of a broad sheet seat, leaving an open airflow and visual path through the changing station. The cylindrical end frames are recessed from the seat corners to increase toe clearance when personnel reach footwear. Each rod is continuously joined to the perimeter rails, while smooth electropolished Type 304 surfaces and rounded exposed edges support routine wipe-down. Four threaded cleanroom glides level the freestanding bench without adding a shoe shelf or closed under-seat cavity.
Key Features
The recessed end frames leave usable toe and heel clearance beneath both ends of the gowning position.
Continuous welds close the rod-to-rail interfaces instead of leaving mechanical fastener pockets across the seat.
Wide non-marking leveling glides stabilize the bench and preserve access to the surrounding floor perimeter.
Préoccupations du client produit
A frequently used gowning seat must keep its under-bench area open, avoid broad particle ledges and remain stable while operators reach toward their feet.
A solid seat creates a broad upward-facing surface that needs frequent complete wiping.Closely spaced round rods reduce the continuous horizontal area and expose all sides for cleaning.
Square legs positioned at the corners obstruct shoes and restrict the operator's foot movement.Recessed cylindrical end frames move the support line away from the active changing zone.
Bolted seat slats leave repeated crevices and loose hardware above the gowning floor.Each stainless rod is continuously welded into smooth perimeter rails.
A long bench can rock when one operator sits close to an end on an uneven floor.Four independently threaded non-marking glides establish a stable bearing plane.
Les applications typiques
Personnel airlock garment and footwear changesPharmaceutical gowning-room seatingBiotechnology clean apparel transitionsSemiconductor fab changing areasHospital sterile-support change rooms
Paramètres techniques
Typical configurable specifications for an airflow-through electropolished stainless gowning bench are listed below.
| Matériaux de base | Type 304 stainless parallel seat rods, cylindrical recessed end frames, welded perimeter rails and non-marking leveling glides |
|---|---|
| Panneau épaisseur | 25 mm diameter solid or sealed hollow stainless seat rods |
| Largeur effective | 1200 mm standard usable seating length |
| Longueur maximale | 450 mm maximum overall bench height |
| Acier face épaisseur | 1.5 mm Type 304 stainless tubular frame wall thickness |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable de type 304 |
| Conductivité thermique | 14 - 17 W / (m · K) pour l'acier inoxydable de type 304 |
| surface finie | Uniform electropolished Type 304 stainless rods, rails and recessed end frames |
| Type joint | Continuous rod-to-rail welds on a fully welded recessed base with threaded cleanroom glides |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
900, 1500 or 1800 mm seat lengthPerforated formed seatFloor-mount end framesType 316 stainless construction
Planning a Stainless Steel Gowning Bench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
