Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraummöbel und Produkte aus Edelstahl
Edelstahl Gowning Bench
An electropolished Type 304 stainless gowning bench with a parallel-rod seat, recessed welded base and adjustable non-marking glides for open, easy-access footwear changing areas.
- Airflow-through rod seat
- Recessed floor-cleaning base
- Continuous welded construction
- Electropolished Type 304 stainless steel
Produkteinführung
This stainless steel gowning bench uses closely spaced round rods instead of a broad sheet seat, leaving an open airflow and visual path through the changing station. The cylindrical end frames are recessed from the seat corners to increase toe clearance when personnel reach footwear. Each rod is continuously joined to the perimeter rails, while smooth electropolished Type 304 surfaces and rounded exposed edges support routine wipe-down. Four threaded cleanroom glides level the freestanding bench without adding a shoe shelf or closed under-seat cavity.
Key Features
The recessed end frames leave usable toe and heel clearance beneath both ends of the gowning position.
Continuous welds close the rod-to-rail interfaces instead of leaving mechanical fastener pockets across the seat.
Wide non-marking leveling glides stabilize the bench and preserve access to the surrounding floor perimeter.
Kunden Produktbedenken
A frequently used gowning seat must keep its under-bench area open, avoid broad particle ledges and remain stable while operators reach toward their feet.
A solid seat creates a broad upward-facing surface that needs frequent complete wiping.Closely spaced round rods reduce the continuous horizontal area and expose all sides for cleaning.
Square legs positioned at the corners obstruct shoes and restrict the operator's foot movement.Recessed cylindrical end frames move the support line away from the active changing zone.
Bolted seat slats leave repeated crevices and loose hardware above the gowning floor.Each stainless rod is continuously welded into smooth perimeter rails.
A long bench can rock when one operator sits close to an end on an uneven floor.Four independently threaded non-marking glides establish a stable bearing plane.
Typische Anwendungen
Personnel airlock garment and footwear changesPharmaceutical gowning-room seatingBiotechnology clean apparel transitionsSemiconductor fab changing areasHospital sterile-support change rooms
Technische Parameter
Typical configurable specifications for an airflow-through electropolished stainless gowning bench are listed below.
| Core Material | Type 304 stainless parallel seat rods, cylindrical recessed end frames, welded perimeter rails and non-marking leveling glides |
|---|---|
| Panel Dicke | 25 mm diameter solid or sealed hollow stainless seat rods |
| Effektive Breite | 1200 mm standard usable seating length |
| Maximale Länge | 450 mm maximum overall bench height |
| Stahl facing Dicke | 1.5 mm Type 304 stainless tubular frame wall thickness |
| Kerndichte | 7900 - 8000 kg / m3 für Edelstahl Typ 304 |
| Thermische Leitfähigkeit | 14 - 17 W / (m · K) für Edelstahl vom Typ 304 |
| Oberfläche Finish | Uniform electropolished Type 304 stainless rods, rails and recessed end frames |
| Gemeinsamer Typ | Continuous rod-to-rail welds on a fully welded recessed base with threaded cleanroom glides |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
900, 1500 or 1800 mm seat lengthPerforated formed seatFloor-mount end framesType 316 stainless construction
Planning a Stainless Steel Gowning Bench specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
