Electropolished stainless cleanroom gowning bench with parallel rod seat

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 가운 벤치

An electropolished Type 304 stainless gowning bench with a parallel-rod seat, recessed welded base and adjustable non-marking glides for open, easy-access footwear changing areas.

Airflow-through rod seat
Recessed floor-cleaning base
Continuous welded construction
Electropolished Type 304 stainless steel

견적 요청 제품 찾아보기

상품 소개

This stainless steel gowning bench uses closely spaced round rods instead of a broad sheet seat, leaving an open airflow and visual path through the changing station. The cylindrical end frames are recessed from the seat corners to increase toe clearance when personnel reach footwear. Each rod is continuously joined to the perimeter rails, while smooth electropolished Type 304 surfaces and rounded exposed edges support routine wipe-down. Four threaded cleanroom glides level the freestanding bench without adding a shoe shelf or closed under-seat cavity.

주요 기능

Parallel stainless seat rods reduce uninterrupted horizontal collection area while supporting a comfortable seated changing position.

The recessed end frames leave usable toe and heel clearance beneath both ends of the gowning position.

Continuous welds close the rod-to-rail interfaces instead of leaving mechanical fastener pockets across the seat.

Wide non-marking leveling glides stabilize the bench and preserve access to the surrounding floor perimeter.

고객 제품 관심사

A frequently used gowning seat must keep its under-bench area open, avoid broad particle ledges and remain stable while operators reach toward their feet.

A solid seat creates a broad upward-facing surface that needs frequent complete wiping.Closely spaced round rods reduce the continuous horizontal area and expose all sides for cleaning.

Square legs positioned at the corners obstruct shoes and restrict the operator's foot movement.Recessed cylindrical end frames move the support line away from the active changing zone.

Bolted seat slats leave repeated crevices and loose hardware above the gowning floor.Each stainless rod is continuously welded into smooth perimeter rails.

A long bench can rock when one operator sits close to an end on an uneven floor.Four independently threaded non-marking glides establish a stable bearing plane.

일반적인 응용 프로그램

Personnel airlock garment and footwear changesPharmaceutical gowning-room seatingBiotechnology clean apparel transitionsSemiconductor fab changing areasHospital sterile-support change rooms

기술 매개변수

Typical configurable specifications for an airflow-through electropolished stainless gowning bench are listed below.

핵심 재료	Type 304 stainless parallel seat rods, cylindrical recessed end frames, welded perimeter rails and non-marking leveling glides
패널 두께	25 mm diameter solid or sealed hollow stainless seat rods
유효 폭	1200 mm standard usable seating length
최대 길이	450 mm maximum overall bench height
강철 면면 두께	1.5 mm Type 304 stainless tubular frame wall thickness
코어 밀도	7900 - 8000 kg / m 3 Type 304 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) 유형 304 스테인레스 스틸
표면 마무리	Uniform electropolished Type 304 stainless rods, rails and recessed end frames
접합 유형	Continuous rod-to-rail welds on a fully welded recessed base with threaded cleanroom glides
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

900, 1500 or 1800 mm seat lengthPerforated formed seatFloor-mount end framesType 316 stainless construction

Planning a Stainless Steel Gowning Bench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.