Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Drainage de salle blanche, équipement d'hygiène et de sécurité
Système de détection de fumée aspirante par
An active air-sampling detector that draws room air through a pipe network for sensitive, centralized smoke analysis.
- Active Air Sampling
- Multi-Level Early Warning
- Supervised Pipe Network
- Serviceable Central Detector
Introduction de produit
The aspirating smoke detection system uses a monitored fan to draw air from distributed sampling holes through small-bore pipes into a filtered optical sensing chamber. Multiple alarm thresholds can distinguish developing conditions from established fire signatures, while airflow supervision reports blocked or broken sampling lines. Locating the detector cabinet in a serviceable position allows filter and chamber maintenance without opening every cleanroom ceiling point.
Key Features
Configurable thresholds support staged investigation and alarm response.
Airflow monitoring detects pipe blockage, leakage or fan faults.
Replaceable filters protect the optical chamber from background contamination.
Préoccupations du client produit
Dilution and directional airflow can delay passive detection, while cleanroom access makes frequent ceiling-device maintenance undesirable.
High air-change rates move smoke away from passive ceiling detectors.A distributed sampling network actively transports room air to the sensing chamber.
Very low alarm thresholds can react to harmless background particles.Filtration, reference settings and staged thresholds separate background from developing smoke.
A blocked sampling hole silently reduces coverage.Continuous airflow supervision reports deviation from the commissioned pipe baseline.
Servicing many room detectors disrupts controlled operations.The fan, filter and chamber are centralized in one accessible cabinet.
Les applications typiques
Semiconductor cleanroomsPharmaceutical production suitesData and control roomsHigh-bay controlled spaces
Paramètres techniques
Typical cabinet construction and sampling-network envelope values are listed below; hole sizing and alarm thresholds are engineered for the airflow model.
| Matériaux de base | Powder-coated steel cabinet with polymer sampling pipe and optical sensing electronics |
|---|---|
| Panneau épaisseur | 1.0-1.5 mm cabinet panels |
| Largeur effective | 250-500 mm cabinet width |
| Longueur maximale | Up to 1000 mm cabinet height |
| Acier face épaisseur | 1.0-1.5 mm powder-coated steel enclosure |
| Densité Core | 7850 kg/m³ for steel cabinet parts |
| Conductivité thermique | 45-60 W/(m·K) for steel enclosure components |
| surface finie | Smooth light-gray powder coating with status display |
| Type joint | Gasketed cabinet with supervised push-fit sampling-pipe connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or multi-pipe detectorRemote displayNetwork communication moduleCleanroom capillary sampling points
Planning a Aspirating Smoke Detection System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
