Infrared touchless stainless hand washing sink with blue splash block

Perabot bilik bersih dan produk keluli tahan karat

Touchless Tangan Basuh Sink

A wall-mounted Type 304 stainless hand wash basin with an infrared-activated plain-end spout, splash-control bowl, preset mixing module and visible blue operating indicator.

Infrared no-touch water activation
Plain-end low-splash spout
Deep rear-waste bowl
Accessible sensor and valve module

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The touchless hand washing sink detects hands beneath its plain-end stainless spout and opens an electronic solenoid without a handle, pedal or knee panel. A deep 560 mm-wide coved bowl positions the drain at the rear corner, away from the incoming stream, while a removable blue splash block limits direct water impact. The sensor head includes a small blue status indicator. A keyed lower service door gives access to the low-voltage controller, battery backup, solenoid, preset mixing valve and inlet strainers.

Ciri-ciri Utama

The infrared sensing zone activates water only when hands enter the defined area below the plain-end spout.

Rear-corner waste placement and a removable splash block separate the incoming stream from the drain opening.

A blue indicator confirms sensor response without adding printed instructions across the cleanable basin face.

The service module groups the controller, backup battery, solenoid, mixing valve and strainers behind one keyed panel.

Kebimbangan Produk Pelanggan

Automated hand washing must reduce contact points while controlling splash and keeping electronic valves accessible for battery, filter and mixing-service work.

Users avoid a touchless station if the sensor response is difficult to confirm.A small blue status light gives immediate visual feedback beside the sensing window.

A spout aimed directly at the drain creates rebound splash onto the user and rear wall.The rear-corner waste and removable blue splash block redirect water within the deep bowl.

Sensor faucets are difficult to troubleshoot when electronics and valves are scattered behind the wall.One keyed service module groups the controller, battery, solenoid, mixer and inlet strainers.

Sediment at the solenoid causes slow closing or inconsistent flow.Serviceable inlet strainers are positioned ahead of the electronic valve on both supply lines.

Permohonan yang biasa

Aseptic processing support hand wash pointsPharmaceutical material airlocksClinical clean preparation roomsBiotechnology controlled corridorsHigh-care packaging hygiene stations

Parameter teknikal

Typical configurable specifications for a wall-mounted infrared touchless hand washing sink are listed below.

Bahan Teras	Type 304 stainless coved basin and plain-end sensor spout with low-voltage controller, solenoid, premixer and service shroud
Ketebalan Panel	1.5 mm formed basin, backsplash and lockable service shroud
Lebar berkesan	560 mm overall single-user sink width
Panjang maksimum	620 mm maximum overall height including spout and backsplash
Keluli Menghadapi Ketebalan	1.5 mm Type 304 stainless exposed sheet surfaces
Ketumpatan teras	7900-8000 kg / m3 untuk keluli tahan karat Jenis 304
Kekonduksian Terma	14-17 W / (m · K) untuk Keluli tahan karat Jenis 304
Kemasan permukaan	Satin-brushed Type 304 exterior, smooth coved bowl, blue removable splash block and blue sensor indicator
Jenis Bersatu	Wall bracket mounting with 35 mm shank spout, quick-connect solenoid hoses, accessible premixer and 38 mm welded waste
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Mains or battery controlTimed automatic shutoffIntegral touchless soap dispenserDual-user trough configuration

Planning a Touchless Hand Washing Sink specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami