Bahasa Inggeris
Bahasa Jerman
Bahasa Arab (Bahasa Melayu)
Bahasa Perancis
Bahasa Indonesia: Bahasa Indonesia
Bahasa Jepun
Bahasa Korea (Bahasa Melayu)
Bahasa Melayu (Bahasa Melayu)Semasa
Bahasa Portugis: Bahasa Portugis: Bahasa Portugis
Bahasa Rusia
Bahasa Sepanyol: Bahasa Sepanyol: Bahasa Sepanyol
Bahasa Melayu (Bahasa Melayu)
Bahasa Turki: Bahasa Turki
Bahasa Vietnam (Bahasa Melayu)
Penapis udara dan penapisan kimia
Terminal HEPA Penapis Perumahan
A welded ceiling terminal that seals a slim HEPA filter above an interchangeable diffuser and permits room-side servicing in controlled spaces.
- Room-Side Filter Access
- Welded Ceiling Plenum
- Gasket or Gel Seal
- Interchangeable Diffuser Face
Pengenalan Produk
The terminal housing forms the final sealed transition from the branch duct to a cleanroom HEPA filter and diffuser. A top or side spigot feeds the welded plenum, where an internal knife edge or compression flange mates with the selected filter seal. Quarter-turn or swing clamps are accessible after the diffuser face is lowered, so the filter can be changed without opening the ceiling void. Upstream pressure and aerosol ports can also be reached from the room for balancing and integrity testing.
Ciri-ciri Utama
Fully welded plenum seams control leakage between the duct and filter face.
Gasket- and gel-seal variants match common slim HEPA frame constructions.
Detachable perforated or swirl diffusers allow the air pattern to be selected independently.
Kebimbangan Produk Pelanggan
The final HEPA interface must remain sealed while allowing testing and filter replacement from the clean side.
Above-ceiling services block access to the terminal filter.Room-side clamps and removable diffuser panels keep routine service below the ceiling.
A loose plenum seam bypasses the HEPA element.Continuous welding joins the duct spigot, box corners and sealing frame into one enclosure.
Filter testing requires temporary hoses through the ceiling.Integrated upstream pressure and aerosol ports terminate at the room-side face.
Different rooms need different supply patterns from the same filter size.Interchangeable perforated, swirl or four-way diffuser faces attach to a common terminal housing.
Permohonan yang biasa
Pharmaceutical cleanroom ceilingsHospital operating roomsBiotechnology laboratoriesMedical-device productionFood aseptic filling zones
Parameter teknikal
Representative dimensions and materials for a cleanroom terminal HEPA housing are listed below.
| Bahan Teras | Fully welded steel plenum with room-side stainless filter clamps and diffuser frame |
|---|---|
| Ketebalan Panel | 1.0–1.5 mm housing panels |
| Lebar berkesan | 305–1220 mm terminal face width |
| Panjang maksimum | Up to 1220 mm terminal face length |
| Keluli Menghadapi Ketebalan | 1.0–1.5 mm galvanized, stainless or powder-coated sheet steel |
| Ketumpatan teras | Approximately 7850 kg/m³ for steel housing and clamp components |
| Kekonduksian Terma | Approximately 45–60 W/(m·K) for the steel plenum |
| Kemasan permukaan | Smooth white RAL 9010 powder coat or brushed 304 stainless steel |
| Jenis Bersatu | Welded plenum with gasket-compression flange or gel-seal knife edge and removable diffuser |
| Penyesuaian | Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi. |
Pilihan yang boleh didapati
Top or side circular duct inletGasket or gel filter sealPerforated, swirl or four-way diffuserRoom-side pressure and aerosol ports
Planning a Terminal HEPA Filter Housing specification?
Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.
