Sanitary sampling valve three-quarter view with manual handwheel

Sistem Utiliti Bilik Bersih

Injap pengambilan sampel kebersihan

A compact 316L membrane valve for withdrawing representative samples from hygienic tanks and process piping without exposing the main process to the surrounding environment.

Sterilizable sampling path
Compact 316L wetted body
Tank or pipe mounting options

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The sanitary sampling valve provides a controlled small-bore path for routine microbiological or physicochemical sampling. A resilient membrane separates the operating mechanism from the product, while the polished stainless body and dedicated outlet arrangement support cleaning and sterilization before and after a sample is taken.

Ciri-ciri Utama

316L stainless product-contact body

Manual handwheel operation

Replaceable EPDM or silicone membrane

Polished low-retention wetted path

Separate sample and sterilization ports

Compact weld-in body

Drainable outlet orientation

Pneumatic actuation available as an option

Kebimbangan Produk Pelanggan

A useful sample must represent the process while the valve remains cleanable, drainable and protected from contamination between sampling events.

A stagnant sample pocket compromises representativenessUse a compact low-volume body mounted close to the process wall or pipe bore.

Ambient contamination enters through the outletSterilize the dedicated outlet path before and after sampling and cap it between uses.

Residue remains behind the membraneSelect a drainable mounting orientation and inspect the membrane at defined maintenance intervals.

Operators release too much productUse the fine manual handwheel or an appropriately controlled pneumatic actuator for repeatable opening.

Permohonan yang biasa

Purified Water and WFI sampling pointsBiopharmaceutical vesselsSterile formulation linesFood and beverage process tanksCIP and SIP verification points

Parameter teknikal

Representative construction values depend on body style, process connection, outlet arrangement and membrane compound.

Bahan Teras	316L stainless steel wetted body with EPDM or silicone membrane
Ketebalan Panel	Process body wall typically 3.0–6.0 mm
Lebar berkesan	Valve body width typically 55–90 mm
Panjang maksimum	Overall installed length typically up to 180 mm
Keluli Menghadapi Ketebalan	Stainless bonnet and handwheel components typically 1.5–4.0 mm
Ketumpatan teras	316L stainless steel density approximately 8000 kg/m³
Kekonduksian Terma	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Kemasan permukaan	Product-contact surfaces mechanically polished to a typical Ra ≤ 0.8 µm, with satin external finish
Jenis Bersatu	Weld-in tank or pipe body with dedicated sample and sterilization outlet connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Tank-weld bodyPipe-weld bodySocket-mounted bodyManual or pneumatic actuatorEPDM or silicone membraneSingle- or double-seat arrangementQuick-connect outlet accessory

Planning a Sanitary Sampling Valve specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami