Thermal imaging camera in three-quarter front view with coated IR lens, visible camera, open protective cap and pistol grip

클린룸 테스트 및 검증 장비

Thermal Imaging 카메라

A handheld gun-style thermal imaging camera with a radiometric infrared detector, visible-light context, rear color display and trigger capture for non-contact surface-temperature surveys.

Radiometric non-contact thermal surveys.
Visible-light context and palette control.
Emissivity correction and stored analysis data.

견적 요청 제품 찾아보기

상품 소개

This portable thermal imaging camera converts long-wave infrared radiation from a surface into a radiometric temperature map. An uncooled microbolometer, protected infrared optic and onboard visible-light camera help the operator locate electrical, mechanical, HVAC and enclosure anomalies without contacting the target. The rear color display supports palette selection, spot and area analysis, while adjustable emissivity and reflected-temperature inputs address common surface-measurement variables. Trigger capture stores the thermogram with its measurement data so the original radiometric file can be reviewed and reported after the inspection.

주요 기능

Radiometric long-wave infrared detector records a temperature value for every thermal-image pixel.

Visible-light camera supplies recognizable equipment context and supports blended or picture-in-picture viewing.

Center spot plus movable area minimum and maximum tools help screen a surface for localized anomalies.

Adjustable emissivity and reflected-temperature inputs support measurements on materials with different radiative properties.

Multiple palettes and manual or automatic level-and-span settings make subtle temperature patterns easier to distinguish.

One-handed trigger capture, rear color display, protected lens and removable battery suit routine field inspection.

고객 제품 관심사

Useful thermography depends on surface emissivity, reflected surroundings, focus, viewing distance, spatial resolution and stable operating load; a thermogram shows a surface-temperature pattern that should be interpreted with inspection context.

Low-emissivity metal can reflect surrounding heat and produce a misleading apparent temperature.Set emissivity and reflected temperature for the surface, use a suitable high-emissivity reference patch where permitted, and compare like surfaces from a controlled angle.

A blurred image or excessive working distance can conceal a small thermal anomaly.Use the specified focus method, observe the minimum focus distance, and move close enough for the target to cover multiple detector pixels while maintaining safe clearance.

Automatic color scaling can make similar temperatures look dramatically different between two images.Lock or manually set level and span when comparing assets, and retain the numerical spot or area readings with the thermogram.

A thermal pattern may indicate a surface anomaly without identifying its underlying cause.Store the radiometric and visible images together, document operating load and conditions, then confirm significant findings with the appropriate electrical, mechanical or airflow test.

일반적인 응용 프로그램

Electrical-panel and control-component temperature surveysAir-handling unit, duct and HVAC distribution checksInsulation, door-seal and building-envelope investigationsMotor, bearing, pump and rotating-equipment screeningProcess-equipment and cleanroom utility troubleshooting

기술 매개변수

Representative construction for a professional handheld thermal imaging camera is listed below; detector resolution, field of view, focus method, temperature range and communication options should be selected for the intended survey distance and target size.

핵심 재료	PC/ABS gun-style enclosure with TPE grip, uncooled VOx microbolometer, germanium infrared optic, visible-light CMOS camera, color LCD, lithium-ion battery and stainless fasteners
패널 두께	Typically 2.0-3.0 mm for the molded enclosure wall
유효 폭	Approximately 90-120 mm across the optical head
최대 길이	Approximately 210-260 mm from lens bezel to handle base
강철 면면 두께	Typically 0.5-1.0 mm for internal EMI shielding, fasteners and threaded inserts
코어 밀도	PC / ABS 엔클로저 혼합의 경우 약 1100 - 1200 kg / m 3
열전도도 (Thermal Conductivity)	PC / ABS 엔클로저 혼합의 경우 약 0. 19 - 0. 22 W / (m · K)
표면 마무리	Fine-texture graphite PC/ABS body, orange TPE grip and trigger, black lens cap, coated germanium optic and full-color rear LCD
접합 유형	Threaded or bayonet infrared-lens bezel with hinged protective cap, sealed data-interface cover, slide-lock battery compartment and 1/4-inch tripod insert
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Infrared detector resolutions from survey-grade to higher-detail configurationsFixed-focus or manual-focus infrared opticsWide-angle or telephoto lens configurationVisible-light fusion and picture-in-picture modesRemovable battery, charging cradle and spare-battery kitRadiometric analysis software, data cable, wrist strap and protective case

Planning a Thermal Imaging Camera specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.