Closed restricted access barrier system around an aseptic filling line

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

Closed Restricted Access Barrier 시스템

An enclosed RABS with controlled internal airflow, glove-access panels and interlocked doors that provides greater process separation than an open barrier.

Enclosed Glazed Barrier
Controlled Internal Airflow
Interlocked Access Doors
Glove-Port Interventions

견적 요청 제품 찾아보기

상품 소개

The closed RABS forms a more complete enclosure around the aseptic process than an open RABS. Rigid panels, sealed lower interfaces and closed doors define the work zone, while filtered air is supplied and returned through the barrier system. Operators intervene through glove ports and use interlocked doors only for controlled setup or maintenance. The system is not automatically equivalent to a gas-tight isolator; its chamber leakage, cleaning and bio-decontamination approach depend on the selected construction.

주요 기능

Closed glazed walls define a controlled internal process-air volume.

Supply and return modules manage airflow within the barrier enclosure.

Interlocked doors reduce simultaneous openings along the process line.

Glove panels support intervention while the main doors stay closed.

Sealed lower skirts connect the barrier to machine frames and conveyor openings.

고객 제품 관심사

A closed RABS must keep doors, machine interfaces and internal airflow coordinated without claiming the gas-tight performance of an isolator.

Room air enters through gaps around machine bases.Custom lower skirts and flexible seals close the interface to the equipment frame.

Multiple doors are opened during one intervention.Door interlocks and defined glove positions reduce unnecessary barrier opening.

Internal heat builds around the process equipment.Dedicated supply and return sections manage the enclosed air volume.

The enclosure is described as gas-tight without suitable construction.The page distinguishes closed RABS separation from pressure-tight isolator containment.

일반적인 응용 프로그램

Aseptic filling linesSterile closure handlingOpen product conveyor protectionBarrier retrofit around critical equipment

기술 매개변수

Typical configurable construction ranges for a closed restricted access barrier system are listed below.

핵심 재료	SUS316L modular barrier frame with laminated safety glass, CSM gloves and integrated supply-return plenums
패널 두께	40-80 mm framed barrier and airflow sections
유효 폭	1500-6000 mm protected line width
최대 길이	Up to 25000 mm closed barrier length
강철 면면 두께	1.5-2.0 mm stainless lower skirts, doors and plenum skins
코어 밀도	Approximately 2500 kg/m³ for laminated safety-glass barrier panels
열전도도 (Thermal Conductivity)	0.8-1.0 W/(m·K) for laminated safety glass
표면 마무리	Fine-brushed SUS316L with flush laminated glazing and sealed lower interfaces
접합 유형	Gasketed modular barrier joints with interlocked doors, sealed machine interfaces and return-air plenums
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Active filtered recirculationInterlocked glove and service doorsAutomated door status monitoringIntegrated cleaning and environmental ports

Planning a Closed Restricted Access Barrier System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.