Vacuum receiver front-left three-quarter view with gray vertical vessel, threaded ports, gauge, safety fitting and base ring

クリーンルームユーティリティシステム

真空受信機

A standalone 120-gallon vertical carbon-steel receiver that adds evacuated buffer volume between a vacuum header and pump, with a full-vacuum/150 psi design boundary, dedicated gauge and safety connections, and a low-point manual drain.

120 US gallon vertical buffer volume
Rated for full vacuum and 150 psi
Dedicated gauge, safety and drain connections

見積もりリクエスト製品案内

商品紹介

The Vacuum Receiver is a standalone welded vessel for stabilizing an industrial vacuum header when process demand changes faster than the connected pump can respond. The selected purchasable basis is one Penway A7120-class 120 US gallon vertical receiver with carbon-steel shell and elliptical heads, neutral gray primer, threaded service openings and one circular base-ring support. Its evacuated volume absorbs short suction peaks and lengthens the interval between pump start/stop events, while the bottom head provides a defined low point for liquid that passes the upstream protection stage. The vessel creates no vacuum by itself: it is not the duplex pump-and-control station used for ID 1927, not the positive-pressure compressed-air receiver used for ID 1917 and not an atmospheric process-storage tank.

主要な特徴

A 120 US gallon nominal volume provides practical buffer capacity for branch headers and intermittent vacuum users

Full-vacuum external-pressure design resists atmospheric collapse when the internal pressure approaches zero absolute

A 150 psi positive-pressure boundary gives the welded vessel a clearly defined two-direction design envelope

Elliptical welded heads distribute shell loads more smoothly than flat end plates and keep the vessel compact

One 3-inch-class main connection and one 2-inch-class secondary connection support a low-restriction header arrangement

Separate gauge and safety/vent couplings keep indication and protective accessories independent of the process connections

A bottom manual drain provides a controlled low point for liquid removal after the receiver is isolated and returned to atmospheric pressure

The continuous base ring spreads the vessel load around its circumference without projecting individual support legs into the service area

お客様の製品に関する懸念事項

Receiver selection depends on usable evacuated volume, allowable pressure boundaries, pump control band, demand profile, line conductance, gas chemistry and the amount of liquid or solids that may reach the header.

A receiver selected only by nominal gallons may still be too small to absorb the peak flow between the high- and low-vacuum control pointsSize usable volume from the actual demand pulse, permitted pressure swing and pump response time, then verify the result against header conductance.

An ordinary thin-wall storage tank can buckle when exposed to full external atmospheric pressureUse a vessel with an explicit full-vacuum design boundary and keep the original nameplate and fabrication documentation traceable to the selected tank.

Condensate or cleaning liquid can collect in the bottom head and reduce usable volume or contaminate downstream serviceProvide upstream separation where carryover is expected, inspect the low point and drain only after isolation and return to atmospheric pressure.

Small nozzles, tight elbows or long branch runs can erase the response benefit of added receiver volumeKeep the main connection and header path short, size the line for the peak suction flow and avoid unnecessary restrictions near the receiver.

A corrosive or solvent-laden gas stream can attack carbon steel, primer and accessory elastomersReview the complete gas and condensate chemistry and select stainless construction, compatible coating and seal materials when carbon steel is unsuitable.

Poor foundation support or external pipe loads can distort nozzles and stress the welded shellSeat the base ring on a level load-bearing pad, anchor it evenly and support connected piping independently of the vessel nozzles.

典型的な用途

Central utility vacuum headers serving intermittent cleanroom and laboratory demand pointsPharmaceutical vessel evacuation systems where short suction peaks need additional buffer volumeVacuum packaging, pick-and-place and material-transfer systems with cyclic demandFiltration and drying processes that require a steadier header pressure during valve changesDegassing and evacuation skids where a standalone receiver is installed between the process and pump trainIndustrial vacuum networks that need a drainable collection low point downstream of suitable inlet separation

技術的なパラメータ

The locked catalogue identity is one unbranded Penway A7120-class vertical industrial vacuum receiver. It contains exactly one medium-gray primer-coated carbon-steel cylindrical shell, one elliptical top head, one elliptical bottom head, one 3-inch-class upper main threaded connection, one 2-inch-class secondary threaded connection, one 1/2-inch instrument coupling with one round analog gauge, one 1/4-inch safety/vent coupling with one compact brass safety fitting, one 1-1/2-inch bottom manual drain, one blank rectangular metal nameplate and one continuous circular base ring with reinforcing gussets. It has zero manways, zero pumps, zero motors, zero filters, zero control cabinets, zero discrete legs and zero footplates. The manufacturer drawing lists 120 US gallons, 24-inch diameter, 67-inch tangent length, about 75-inch overall height, 360 lb weight, 150 psi and full-vacuum design boundary, carbon steel, gray primer and base-ring support.

コア材料	Welded carbon-steel cylindrical shell and elliptical heads with stainless-steel drain hardware, brass safety fitting and project-compatible seals
パネルの厚さ	6 mm nominal carbon-steel cylindrical shell basis
有効幅	610 mm vessel outside-diameter basis
最大長さ	1905 mm nominal overall vertical height
鋼鉄の厚さを直面する	8 mm nominal formed carbon-steel head basis
コア密度	Approximately 7850 kg/m³ for the principal carbon-steel shell and heads
熱伝導率	Approximately 45-60 W/(m·K) for the principal carbon-steel structure at ambient temperature
表面仕上げ	Neutral medium-gray industrial primer on the exterior, as-welded carbon-steel interior and natural metal accessories
ジョイントタイプ	3-inch NPT main vacuum connection, 2-inch NPT secondary connection, 1/2-inch gauge port, 1/4-inch safety/vent port and 1-1/2-inch NPT bottom drain
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Alternative receiver volume and vertical or horizontal orientation matched to the calculated demand cycle304 or 316 stainless-steel vessel construction for compatible corrosive or high-cleanliness serviceSpecial internal lining or exterior coating selected for the gas, condensate and installation environmentFlanged or threaded main connections with application-sized nozzle diameters and orientationsVacuum gauge, absolute-pressure transmitter or compound pressure transmitterVacuum breaker, pressure-relief accessory and isolation valve selected for the defined operating envelopeAutomatic or manual low-point drain with liquid-level indication for carryover-prone dutiesAlternative base ring, mounting feet or engineered support arrangement for the installation foundation

Planning a Vacuum Receiver specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する