Three-quarter view of a yellow polyurethane foam sealant can with applicator straw

クリーンルームの設置付属品

ポリウレタンフォームシーラント

A controlled-expansion polyurethane foam for insulating and filling concealed gaps around cleanroom frames, panels and service openings.

Controlled Gap Expansion
Thermal and Acoustic Fill
Strong Substrate Adhesion
Trim-and-Finish Surface

見積もりリクエスト製品案内

商品紹介

Polyurethane foam sealant is dispensed from a pressurized aerosol can as a moisture-reactive cellular material. It expands within irregular concealed voids, adheres to many common construction substrates and cures into a lightweight insulating fill that can be trimmed after hardening. In cleanroom work it is normally kept behind the exposed hygienic finish, with the accessible joint subsequently closed using a smooth compatible sealant or trim profile.

主要な特徴

Controlled expansion reaches irregular frame and panel cavities that are difficult to pack manually.

The cured closed- and open-cell structure reduces uncontrolled air movement through concealed gaps.

Adhesion to compatible concrete, masonry, timber, metal and rigid insulation stabilizes the filled cavity.

Hardened excess can be cut back to receive a cleanable cover trim or surface seal.

お客様の製品に関する懸念事項

Irregular installation cavities need a continuous insulating fill without allowing expanding foam to become the exposed cleanroom surface.

Rigid packing leaves small inaccessible voids behind frames.Fresh foam expands into uneven spaces and bonds to prepared cavity surfaces.

Excessive expansion can bow lightweight panels or distort frames.A low- or controlled-expansion grade is applied in measured lifts with room left for curing growth.

Exposed cellular foam is difficult to clean and can degrade under light.The cured fill is trimmed below the face and protected by a smooth compatible sealant or cover profile.

Dry or dusty substrates produce weak and uneven cure.Surfaces are cleaned and lightly conditioned with moisture where the selected product instructions permit.

典型的な用途

Door and window frame backfillingConcealed cleanroom panel perimeter gapsService sleeve annular voidsCeiling and partition installation cavitiesInsulating gaps behind hygienic trims

技術的なパラメータ

Typical construction and application ranges for a one-component aerosol polyurethane foam sealant are shown below.

コア材料	One-component moisture-curing polyurethane prepolymer and propellant
パネルの厚さ	10-80 mm practical filled cavity depth per controlled application
有効幅	10-50 mm recommended concealed gap width
最大長さ	Up to 30000 mm indicative bead length per 750 mL can, depending on bead size
鋼鉄の厚さを直面する	0.40-1.20 mm compatible cleanroom panel or frame facing
コア密度	Approximately 15-30 kg/m³ free-rise cured foam density
熱伝導率	Approximately 0.033-0.040 W/(m·K) for cured foam
表面仕上げ	Trimmed cellular foam concealed beneath a cleanable sealant or cover trim
ジョイントタイプ	Concealed frame, perimeter or penetration cavity fill
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Straw-applied or gun-grade canLow-expansion frame gradeSummer or winter application gradeStandard yellow or off-white cured foam

Planning a Polyurethane Foam Sealant specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する