Three-quarter view of a white floor-standing fan filter unit on a rigid blue-grey support frame

FFU およびターミナル空気浄化装置

床立ファンフィルターユニット

A self-supporting filtered-air station that places an FFU at process height on a rigid floor frame for localized horizontal clean-air coverage.

Self-Supporting Frame
Process-Height Air Delivery
Adjustable Levelling Feet
Single or Twin FFU Layout

見積もりリクエスト製品案内

商品紹介

The floor-standing fan filter unit mounts one or two standard filter modules in a reinforced steel frame rather than in a suspended ceiling. Its fixed-height legs carry the fan mass and align the discharge face with the work surface, while wide levelling pads compensate for uneven floors. Power and speed controls are routed along the rear uprights to keep the clean-air face clear. This arrangement establishes a local horizontal clean zone beside production machinery, transfer openings or benchtop operations without modifying the building ceiling system.

主要な特徴

A rigid rectangular base carries the complete FFU load independently of ceiling panels or wall framing.

The elevated module aligns filtered discharge with benches, conveyors and equipment access openings.

Rear cable routing keeps electrical leads away from the clean airflow and operator path.

Single- and twin-module frames permit the protected width to be matched to the process footprint.

お客様の製品に関する懸念事項

A fixed clean-air source is often needed beside existing equipment where neither ceiling reconstruction nor constant relocation is desirable.

Retrofitting a ceiling grid for one local process causes disproportionate shutdown and construction work.The self-supporting floor frame adds filtered airflow without opening the overhead envelope.

A low temporary purifier directs clean air below the actual handling surface.The raised FFU face is positioned at the working elevation for useful horizontal coverage.

Uneven floors cause a tall clean-air wall to lean and misdirect the airflow plane.Four adjustable levelling feet establish a stable vertical frame and repeatable outlet alignment.

Power cables crossing the front of the unit obstruct cleaning and material movement.Rear uprights conceal protected cable routes and keep the discharge side uncluttered.

典型的な用途

Temporary clean production cellsEquipment loading interfacesBenchtop assembly protectionPackaging and inspection stationsCleanroom retrofit areas

技術的なパラメータ

Typical dimensional and material ranges for a fixed floor-standing FFU station are provided below.

コア材料	Powder-coated steel support frame with EC fan module and micro-glass HEPA or ULPA filter
パネルの厚さ	380-600 mm overall frame and FFU depth
有効幅	610-2440 mm clean-air face width for one or two modules
最大長さ	Up to 2100 mm overall standing height
鋼鉄の厚さを直面する	1.2-2.0 mm folded steel frame; 0.8-1.2 mm FFU enclosure
コア密度	Approximately 90-120 kg/m³ compacted density of the HEPA or ULPA pack installed in the floor-standing cabinet
熱伝導率	Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack in the floor-standing FFU
表面仕上げ	White powder-coated frame with blue control box and stainless or anodized diffuser
ジョイントタイプ	Bolted modular frame with compression-seal filter and adjustable threaded floor feet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

One- or two-FFU support frameFixed feet or floor anchorsHorizontal positive-flow or reverse-flow arrangementIntegrated speed controller and differential-pressure display

Planning a Floor-Standing Fan Filter Unit specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する