Three-quarter view of black conductive ESD brush with long molded handle

ESD および帯電防止製品

ESD ブラシ

The ESD Brush is a reusable conductive cleaning tool for removing loose debris from electronic assemblies and grounded ESD work areas.

Conductive handle and bristle path help equalize charge when the brush contacts a grounded operator or work surface.
Dense, resilient filaments lift loose particles without introducing an ordinary insulating brush into the EPA.
Slim long-handle form reaches between assemblies, fixtures and bench equipment.

見積もりリクエスト製品案内

商品紹介

This long-handled brush combines a carbon-loaded black polymer body with permanently conductive or dissipative synthetic bristles. The molded handle provides a continuous grasping surface and a hanging hole for controlled storage. Its narrow bristle block reaches along PCB edges, connector rows and equipment recesses while the grounded user or bench surface provides the path for charge equalization.

主要な特徴

Carbon-loaded polymer handle avoids a conventional insulating grip.

Static-control bristles retain their electrical function without a surface coating.

Narrow rectangular brush head reaches confined assembly areas.

Dense filament rows collect dry particles with light sweeping pressure.

Rounded handle edges support repetitive bench cleaning.

One-piece molded handle-to-head structure resists loosening.

Bristle stiffness and head width can be selected for the component geometry.

お客様の製品に関する懸念事項

Cleaning near electrostatic-sensitive parts requires both controlled electrical behavior and a brush geometry that does not damage small features.

Ordinary plastic brushes can charge during repeated strokes.Conductive or dissipative handle and bristle materials provide a controlled path to the grounded user or bench.

Stiff fibers can bend leads or scratch delicate surfaces.Bristle stiffness can be matched to the assembly and contamination type.

Wide brush heads cannot reach between fixtures.The slim head and extended handle improve access to narrow spaces.

Coated bristles may lose performance as the coating wears.Static-control properties are incorporated into the selected filament material.

Loose brushes are difficult to keep organized.The hanging hole supports dedicated EPA storage and visual control.

典型的な用途

PCB assembly and repair benches.Semiconductor tooling and fixture cleaning.Connector and component preparation.Electronics inspection stations.ESD-protected laboratories.Dry removal of loose particles from grounded work surfaces.

技術的なパラメータ

The listed dimensions describe a representative long-handle bench brush. Conductive and dissipative bristle grades are selected according to the sensitivity of the assembly and the required particle-removal action.

コア材料	Carbon-loaded polypropylene handle with conductive or static-dissipative nylon bristles
パネルの厚さ	3.0-5.0 mm representative molded handle-wall thickness
有効幅	25-60 mm available bristle-block width
最大長さ	Up to 300 mm overall brush length
鋼鉄の厚さを直面する	Not applicable; 0 mm steel facing
コア密度	900-1150 kg/m³ representative polymer-handle density
熱伝導率	0.2-0.4 W/(m·K) representative carbon-filled polymer range
表面仕上げ	Matte black conductive molded handle with resilient low-shedding bristles
ジョイントタイプ	Permanently set filament bundle in an integral molded brush head
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Conductive black or static-dissipative bristle grade.Soft, medium or hard filament stiffness.Flat, round or narrow-detail head.Short or long molded handle.Alternative bristle-block widths.IPA-compatible material selection.Process-specific brush kits.

Planning a ESD Brush specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する