Complete open-front downflow containment booth

層流 · 封じ込め装置

ダウンフロー封じ込めブース

A general-purpose open-front containment booth that uses filtered vertical airflow and low-level returns to control airborne powder during manual handling.

Uniform Vertical Downflow
Open-Front Work Access
Low-Level Capture
Recirculating or Once-Through Air

見積もりリクエスト製品案内

商品紹介

The downflow booth is the base platform for weighing, dispensing, sampling and other manual powder operations. Filtered supply air descends from a full ceiling plenum, entrains released particles and moves them to rear low-level returns. Recirculating layouts suit many dry powder tasks, while once-through arrangements can be selected where vapor or solvent considerations require exhausted air. The work area, airflow rate and filter-change method are configured from the process risk assessment.

主要な特徴

A full-width ceiling diffuser creates a low-turbulence working zone.

Low return grilles remove powder below the operator's breathing area.

Open-front access accommodates drums, benches and mobile process equipment.

Recirculating and once-through air paths support different process media.

Modular filter stages permit standard or contained maintenance arrangements.

お客様の製品に関する懸念事項

A versatile booth must maintain controlled airflow across different equipment layouts without being presented as one universal containment grade.

Powder tasks change between drums, benches and mobile equipment.The open work zone accepts interchangeable process furniture and handling aids.

Recirculating air is unsuitable for some vapor-producing operations.A once-through exhaust configuration can be selected for the applicable process.

Equipment blocks the rear capture path.Pallet stops and layout markings preserve clearance in front of the low returns.

A fixed containment claim does not match every powder.Airflow, filters and change method are configured to the actual material and handling task.

典型的な用途

Powder weighingRaw-material samplingIngredient dispensingContainer subdivision

技術的なパラメータ

Typical configurable construction ranges for an open-front downflow containment booth are listed below.

コア材料	Mineral-wool insulated coated-steel panels with SUS304 work-zone liners and staged filtration plenums
パネルの厚さ	50-100 mm insulated wall and ceiling panels
有効幅	1500-6000 mm clear work-zone width
最大長さ	Up to 8000 mm booth depth
鋼鉄の厚さを直面する	0.8-1.2 mm coated steel; 1.0-1.5 mm stainless work-zone facing
コア密度	80-120 kg/m³ mineral-wool core
熱伝導率	ミネラルウールコアのための 0.035 — 0.045 W / （ m · K ）
表面仕上げ	White powder-coated exterior with brushed stainless lower work-zone surfaces
ジョイントタイプ	Flush sealed panels with gasketed supply modules and welded low-level return plenums
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Recirculating or once-through configurationSafe-change filter housingsMobile workbenchesCooling coil and environmental controls

Planning a Downflow Containment Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する