Complete flush stainless cleanroom emergency call station in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

クリーンルーム緊急コールステーション

A flush stainless call point with a large illuminated control and status confirmation for isolated cleanroom and laboratory areas.

Large Illuminated Call Button
Flush Stainless Front Plate
Call Status Confirmation
Supervised Remote Interface

見積もりリクエスト製品案内

商品紹介

The cleanroom emergency call station mounts a large sealed push button, status indicator and optional two-way audio behind a flush stainless faceplate. Activation sends a supervised signal to the designated control, security or nurse-call system and provides local confirmation that the request has been registered. A gasketed back box and smooth engraved labeling support cleaning without exposed paper labels.

主要な特徴

A large illuminated button is easy to identify and operate while wearing gloves.

Local status indication confirms call transmission and acknowledgement.

A flush stainless face minimizes ledges in clean corridors.

Dry contacts, supervised loops or network interfaces connect to the receiving system.

お客様の製品に関する懸念事項

Personnel working alone need a simple assistance control that confirms the call and remains compatible with gloved use and frequent cleaning.

Small recessed controls are difficult to operate with gloves.A large raised or mushroom-style illuminated button provides a clear target.

The caller cannot tell whether the signal reached the control room.Separate sent and acknowledged indications confirm call progression.

Surface boxes create dirt-catching ledges.A recessed gasketed back box keeps the stainless face close to the wall plane.

A cut cable could silently disable the station.Supervised circuits or network health monitoring report wiring faults.

典型的な用途

Isolated cleanrooms研究室の廊下Airlocks and gowning areasControlled utility rooms

技術的なパラメータ

Typical station construction values are listed below; signaling protocol and acknowledgement workflow are selected for the receiving system.

コア材料	AISI 304 stainless faceplate with sealed industrial push button and status LEDs
パネルの厚さ	1.5-2.0 mm faceplate
有効幅	100-250 mm
最大長さ	Up to 350 mm faceplate height
鋼鉄の厚さを直面する	1.5-2.0 mm exposed stainless plate
コア密度	7900-8000 kg/m³ for stainless components
熱伝導率	14-16 W/(m·K) for stainless components
表面仕上げ	Satin brushed stainless with engraved or laser-marked identification
ジョイントタイプ	Gasketed flush faceplate on recessed back box with pluggable supervised terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Call and reset buttonsTwo-way audioDry-contact or network interfaceCustom engraved legend

Planning a Cleanroom Emergency Call Station specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する