Stainless walk-through shoe sole cleaner with rotating brush track

Equipement de décontamination du personnel et du matériel

Walk-Through Shoe Sole Cleaner par

A walk-through stainless steel cleaner that uses rotating brush tracks to remove loose material from shoe soles during entry.

Full-sole brush track
Sensor-start drive
Controlled liquid application
Removable brush cassettes

Demander un devis. Browse les produits

Introduction de produit

The Walk-Through Shoe Sole Cleaner places counter-rotating cylindrical brushes beneath a guarded entry track so users clean their soles while moving forward. A presence sensor can start the brush drive only for an occupied passage, and a regulated circuit can apply water or a compatible cleaning solution at the bristle zone. The stainless drip pan, brush cassettes and strainers are designed for routine access during cleaning.

Key Features

Brush rows contact heel, arch and toe areas as the user progresses through the track.

Presence sensing limits brush operation to occupied entry cycles.

A contained drip pan directs liquid and debris toward an accessible strainer.

Quick-release cassettes let personnel remove brushes without dismantling the handrail.

Dry-brush configurations are available where liquid use is not required.

Préoccupations du client produit

Shoe tread can retain loose debris in recessed patterns that a flat contact surface does not reach consistently.

Deep tread grooves remain dirty after contact with a flat mat.Rotating bristles mechanically reach into the tread pattern during the walk-through step.

Workers bypass a separate footwear station during busy entry periods.The brush track is positioned as part of the normal route to the controlled area.

Excess liquid makes the surrounding floor difficult to manage.Metered application and a contained drain pan keep liquid within the brush zone.

Fixed brushes make thorough sanitation of the wet zone time-consuming.Removable cassettes expose the pan and allow brushes to be cleaned separately.

Les applications typiques

Cleanroom personnel entrancesFood production hygiene barriersPharmaceutical support areasMedical manufacturing changing roomsControlled packaging facilities

Paramètres techniques

Brush-track length, liquid arrangement and handrail position can be chosen to suit the entry route and footwear type.

Matériaux de base	Food-grade polypropylene brush cores in a welded SUS304 frame
Panneau épaisseur	1.5–2.0 mm stainless steel body panels
Largeur effective	400–800 mm brush-track width
Longueur maximale	1000–2200 mm overall track length
Acier face épaisseur	1.5–2.0 mm SUS304
Densité Core	900–1100 kg/m³ for polypropylene brush cores
Conductivité thermique	0.10–0.22 W/(m·K) for polymer brush components
surface finie	Brushed SUS304 with hygienic welds and non-slip step surfaces
Type joint	Continuous welded frame with removable sealed brush cassettes
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Dry-brush configurationWater or compatible-solution applicationLeft or right handrailEntry-lane length extension

Planning a Walk-Through Shoe Sole Cleaner specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe