Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Pipe Support et Hanger
A galvanized split-ring pipe hanger with an EPDM liner, threaded suspension rod and ceiling plate for supporting cleanroom utility pipework.
- EPDM-Lined Split Ring
- Threaded Drop Adjustment
- Two-Bolt Clamp Closure
- Galvanized Steel Hardware
Introduction de produit
This suspended support combines a two-piece circular clamp, resilient liner and adjustable threaded drop in one compact assembly. The liner separates the pipe from the steel band and cushions minor vibration, while the two side fasteners open the ring for installation around completed pipe runs. A locknut secures the selected drop height beneath the two-hole ceiling plate.
Key Features
A continuous black EPDM liner cushions the pipe surface and limits direct metal-to-pipe contact.
The centered threaded rod provides practical vertical adjustment during utility alignment.
Two opposed closing bolts distribute clamping force around the circular band.
The compact top plate provides two clearly separated structural attachment points.
Préoccupations du client produit
Cleanroom utility lines need adjustable overhead support that protects the pipe surface, avoids unstable point contact and remains accessible during alignment.
Rigid bare-metal bands can mark coated pipe and transmit vibration into the support structure.The continuous EPDM liner creates a resilient separation layer between the pipe and galvanized clamp.
A fixed suspension length makes it difficult to maintain pipe slope beneath uneven structure.The threaded rod and locknut allow the clamp elevation to be adjusted before final tightening.
Closed-loop hangers are awkward to add after a utility run has been assembled.The two-piece ring opens at its side fasteners so it can be fitted around an existing line.
Single-point ceiling attachments can rotate while installers align the pipe run.The two-hole anchor plate provides a stable structural interface above the centered hanger rod.
Les applications typiques
Cleanroom process-water pipe suspensionCompressed-air and inert-gas utility linesLow-temperature drain and condensate pipingService-plenum tubing supportPharmaceutical and electronics facility utility routing
Paramètres techniques
Typical material and dimensional ranges for an adjustable lined cleanroom pipe support and hanger are listed below.
| Matériaux de base | Zinc-plated carbon-steel split ring, threaded rod and ceiling plate with black EPDM liner |
|---|---|
| Panneau épaisseur | 2.0-3.0 mm nominal split-ring band thickness |
| Largeur effective | 15-200 mm nominal supported pipe outside diameter |
| Longueur maximale | Up to 1500 mm adjustable threaded suspension drop |
| Acier face épaisseur | 3.0-5.0 mm nominal ceiling plate thickness |
| Densité Core | Approximately 7850 kg/m³ for carbon-steel components |
| Conductivité thermique | Approximately 45-60 W/(m·K) for carbon steel |
| surface finie | Silver electro-galvanized steel with matte black EPDM contact lining |
| Type joint | Two-bolt lined split ring connected to a locknut-adjusted threaded suspension rod |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
M8, M10 or M12 suspension rodElectro-galvanized, hot-dip galvanized or stainless-steel hardwareEPDM or silicone liner selectionClamp diameters matched to the utility pipe outside diameterCustom ceiling plate and suspension drop length
Planning a Pipe Support and Hanger specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
