Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Cleanroom Waste Pass-through Box (en anglais seulement) par
A dedicated stainless steel pass-through for moving bagged waste out of a clean area without sharing the incoming-material route.
- Dedicated outbound waste route
- Removable liner support
- One-way interlocked doors
- Sloped cleanable base
Introduction de produit
The Cleanroom Waste Pass-Through Box separates dirty outbound material from the route used for clean incoming supplies. A removable liner frame supports closed waste bags away from the chamber walls, and the stainless base can be formed with a slope toward the collection side. Door interlocking guides the transfer sequence so that loading and collection occur from separate sides of the cleanroom boundary.
Key Features
The removable liner frame reduces direct contact between bags and chamber surfaces.
A sloped stainless base directs liquid residue toward an accessible collection edge.
Coved internal corners make post-transfer wipe-down more practical.
Foot, elbow or touch-free release arrangements can reduce handle contact.
Préoccupations du client produit
Waste bags and clean supplies should not depend on the same chamber, surfaces or handling sequence.
Incoming materials and bagged waste share one standard pass box.A dedicated outbound waste unit creates a separate transfer route.
Waste bags snag on latches or hard internal edges.A smooth removable carrier supports the bag within the chamber.
Liquid residue remains in the rear of a flat transfer base.The sloped, sealed base directs residue toward a reachable collection side.
Staff touch door handles immediately after waste handling.Hands-free release options can be selected for the relevant transfer side.
Les applications typiques
Pharmaceutical production waste removalLaboratory consumable disposalMedical cleanroom waste transferFood clean-zone packaging wasteBattery-process material disposal
Paramètres techniques
Dimensions and door arrangement are selected around bag size, bin handling method and the desired outbound flow.
| Matériaux de base | SUS304 or SUS316L stainless steel chamber with removable waste liner frame |
|---|---|
| Panneau épaisseur | 1.2–1.5 mm stainless steel chamber and door panels |
| Largeur effective | 500–900 mm clear chamber width |
| Longueur maximale | 600–1200 mm chamber depth |
| Acier face épaisseur | 1.2–1.5 mm SUS304 or SUS316L |
| Densité Core | 7900–8000 kg/m³ for stainless steel |
| Conductivité thermique | 14–16 W/(m·K) for stainless steel |
| surface finie | Brushed stainless steel with coved interior and sloped base |
| Type joint | Sealed chamber with one-way interlocked gasketed doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Foot-operated clean-side releaseFloor-level bin transferWash-down drain connectionBag-presence indication
Planning a Cleanroom Waste Pass-Through Box specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
