Stainless steel cleanroom waste pass-through box

인력 및 재료 오염 제거 장비

청정실 폐기물 통과 상자

A dedicated stainless steel pass-through for moving bagged waste out of a clean area without sharing the incoming-material route.

Dedicated outbound waste route
Removable liner support
One-way interlocked doors
Sloped cleanable base

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Waste Pass-Through Box separates dirty outbound material from the route used for clean incoming supplies. A removable liner frame supports closed waste bags away from the chamber walls, and the stainless base can be formed with a slope toward the collection side. Door interlocking guides the transfer sequence so that loading and collection occur from separate sides of the cleanroom boundary.

주요 기능

A dedicated enclosure separates waste handling from incoming material transfer.

The removable liner frame reduces direct contact between bags and chamber surfaces.

A sloped stainless base directs liquid residue toward an accessible collection edge.

Coved internal corners make post-transfer wipe-down more practical.

Foot, elbow or touch-free release arrangements can reduce handle contact.

고객 제품 관심사

Waste bags and clean supplies should not depend on the same chamber, surfaces or handling sequence.

Incoming materials and bagged waste share one standard pass box.A dedicated outbound waste unit creates a separate transfer route.

Waste bags snag on latches or hard internal edges.A smooth removable carrier supports the bag within the chamber.

Liquid residue remains in the rear of a flat transfer base.The sloped, sealed base directs residue toward a reachable collection side.

Staff touch door handles immediately after waste handling.Hands-free release options can be selected for the relevant transfer side.

일반적인 응용 프로그램

Pharmaceutical production waste removalLaboratory consumable disposalMedical cleanroom waste transferFood clean-zone packaging wasteBattery-process material disposal

기술 매개변수

Dimensions and door arrangement are selected around bag size, bin handling method and the desired outbound flow.

핵심 재료	SUS304 or SUS316L stainless steel chamber with removable waste liner frame
패널 두께	1.2–1.5 mm stainless steel chamber and door panels
유효 폭	500–900 mm clear chamber width
최대 길이	600–1200 mm chamber depth
강철 면면 두께	1.2–1.5 mm SUS304 or SUS316L
코어 밀도	7900–8000 kg/m³ for stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for stainless steel
표면 마무리	Brushed stainless steel with coved interior and sloped base
접합 유형	Sealed chamber with one-way interlocked gasketed doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Foot-operated clean-side releaseFloor-level bin transferWash-down drain connectionBag-presence indication

Planning a Cleanroom Waste Pass-Through Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.