Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
FFU HEPA Filter
A compact mini-pleat final filter that restores high-efficiency particle filtration in an existing cleanroom fan filter unit.
- Dense Mini-Pleat Media
- Low-Profile FFU Frame
- Sealed Perimeter Pack
- Matched Gasket Interface
Produkteinführung
The FFU HEPA filter is the final air-cleaning element installed beneath the fan section of a fan filter unit. Fine glass-fiber media is formed into closely spaced mini-pleats and stabilized with hot-melt separators to provide a large filtration area within a shallow frame. Perimeter potting prevents bypass between the media pack and aluminum frame, while a compression gasket seals the filter against its supporting surface. Replacement size, efficiency class, pressure drop, gasket side and airflow direction must match the original FFU design.
Key Features
Continuous perimeter potting closes the leakage path between media and frame.
A fitted compression gasket seals the filter to the FFU housing or ceiling interface.
Protective face grids reduce accidental pleat damage during handling and installation.
Kunden Produktbedenken
A replacement HEPA panel must fit the FFU precisely while preserving airflow and eliminating bypass around the media pack.
A frame with incorrect dimensions leaves gaps or cannot enter the FFU housing.Face size, depth and corner tolerances are matched to the original filter envelope.
An unsuitable pressure drop reduces delivered cleanroom airflow.Media area and pleat geometry are selected for the FFU operating face velocity.
Air bypasses the media through an incompatible gasket arrangement.Gasket material, width, thickness and upstream or downstream position are matched to the sealing surface.
Pleats are damaged during overhead handling and replacement.Optional upstream and downstream protective grids shield the media without blocking its open area.
Typische Anwendungen
Cleanroom fan filter unitsLaminar-flow ceiling modulesMini-environment final filtrationFFU filter replacement programs
Technische Parameter
Typical construction ranges for replacement FFU mini-pleat HEPA filters are shown below.
| Core Material | Water-resistant micro-glass-fiber HEPA media with hot-melt mini-pleat separators |
|---|---|
| Panel Dicke | 50-120 mm nominal filter depth |
| Effektive Breite | 305-610 mm nominal face width |
| Maximale Länge | Bis zu 1220 mm Nennfläche |
| Stahl facing Dicke | 0.4-0.8 mm optional galvanized-steel protective grid wire or sheet |
| Kerndichte | Approximately 80-150 kg/m³ nominal pleated media-pack bulk density |
| Thermische Leitfähigkeit | Approximately 0.035-0.050 W/(m·K) for the dry glass-fiber media pack |
| Oberfläche Finish | Natural anodized-aluminum frame with white media and dark-gray closed-cell gasket |
| Gemeinsamer Typ | Mini-pleat pack continuously potted into a mitered frame with compression-gasket seal |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Matched HEPA efficiency classUpstream or downstream gasketSingle or double protective gridCustom FFU face size and depth
Planning a FFU HEPA Filter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
