Đơn vị ngưng tụ làm mát bằng không khí
- Direct Ambient Heat Rejection
- Staged Scroll Compression
- Weather-Resistant Cabinet
- Remote DX Coil Service
Giới thiệu Sản phẩm
The air-cooled condensing unit combines scroll compressors, a finned outdoor condenser, axial fans, refrigerant controls and electrical protection in one weather-resistant enclosure. It connects to a remote evaporator coil in an air-handling unit, keeping compressor noise and rejected heat outside the controlled area. Independent refrigerant circuits and staged fan control can follow varying sensible and latent loads while accessible service panels simplify routine inspection.
Các tính năng chính
Tandem scroll circuits allow capacity steps and retain partial cooling when one circuit is isolated.
Separate liquid and suction service connections support remote AHU evaporators and properly routed field piping.
Removable coil guards and hinged control access keep fans, compressors and electrical components serviceable from the perimeter.
Các mối quan tâm về sản phẩm của khách hàng
Outdoor condensers must reject a variable cleanroom load without introducing cooling water or compromising refrigeration reliability.
Các ứng dụng điển hình
Thông số kỹ thuật
Representative commercial construction ranges for an outdoor cleanroom condensing unit are listed below.
| Vật liệu lõi | Powder-coated galvanized steel enclosure with copper-tube/aluminum-fin or all-aluminum microchannel condenser coil |
|---|---|
| Độ dày bảng điều khiển | 1.0-1.5 mm removable cabinet panel thickness |
| Chiều rộng hiệu quả | 900-2200 mm nominal cabinet width |
| Chiều dài tối đa | Up to 4200 mm for multi-compressor assemblies |
| Thép đối mặt với độ dày | 1.0-1.5 mm galvanized steel exterior panels |
| Mật độ lõi | Approximately 2660-2840 kg/m³ for the aluminum condenser fins or microchannel heat-exchanger sections |
| Độ dẫn nhiệt | Approximately 113-234 W/(m·K) for the aluminum condenser heat-transfer material |
| Kết thúc bề mặt | UV-resistant polyester powder coating over galvanized steel |
| Loại khớp nối | Bolted modular casing with gasketed service panels and brazed refrigerant joints |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
Planning a Air-Cooled Condensing Unit specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại