Chemical-resistant novolac epoxy flooring slab with charcoal barrier layers, stainless pipe penetration and smooth reinforced collar

클린룸 바닥 시스템

화학 내성 Novolac 에포시 바닥재

A highly cross-linked novolac epoxy floor system for concrete exposed to aggressive acids, alkalis, solvents and concentrated process chemicals.

Highly Cross-Linked Novolac Resin
Broad Chemical Resistance
Seamless Containment Surface
High-Build Concrete Protection

견적 요청 제품 찾아보기

상품 소개

Chemical-resistant novolac epoxy flooring uses a highly cross-linked resin structure to withstand chemicals that can soften or rapidly stain general-purpose epoxy. It is installed as a high-build multi-coat system or as a sealed aggregate-broadcast topping, depending on traffic and traction needs. The resin is carried over prepared concrete, coves, plinths and containment upstands to limit exposed leakage paths. Final resin selection is based on the actual chemical, concentration, exposure temperature, contact duration and cleaning regime rather than a generic acid-resistant claim.

주요 기능

Novolac epoxy chemistry provides higher cross-link density than standard bisphenol-A floor epoxy.

Multiple high-build coats reduce pinhole risk and form a continuous liquid barrier over prepared concrete.

The system can protect horizontal floors, coves, plinths and containment upstands with one compatible resin family.

Aggregate broadcast options add traction and mechanical depth where chemical splash combines with trolley traffic.

고객 제품 관심사

Chemical exposure is defined by concentration, temperature and contact time; a coating that survives a brief splash may not tolerate warm continuous immersion.

Concentrated acid softens or discolors a standard general-purpose epoxy.A higher-cross-link novolac epoxy is selected against the known chemical concentration and exposure temperature.

A pinhole allows liquid to reach concrete and spread beneath the coating.Primer, stripe coats at details and multiple high-build layers close pores before the floor enters service.

Leakage follows the floor-wall joint outside a containment area.The resin lining continues over a formed cove and upstand to remove the exposed corner seam.

One generic formulation is specified for acids, caustics and solvents with different attack mechanisms.The formulation and film build are chosen from a chemical-resistance matrix for the actual process inventory.

일반적인 응용 프로그램

Chemical dosing and formulation roomsBattery storage and charging areasWastewater treatment spacesLaboratory chemical storesSecondary containment and bund floors

기술 매개변수

Typical construction ranges for a high-build novolac epoxy floor and containment lining are listed below.

핵심 재료	100% solids novolac epoxy resin with chemical-resistant hardener and optional mineral aggregate
패널 두께	0.5–1.5 mm multi-coat system, with thicker broadcast builds available
유효 폭	Typically 2000–4000 mm controlled squeegee application width
최대 길이	Typically up to 12000 mm continuous lining run between detailed movement joints
강철 면면 두께	0 mm; chemical protection is provided by the resin lining
코어 밀도	Approximately 1300–1550 kg/m³ for mixed novolac epoxy, excluding heavy broadcast aggregate
열전도도 (Thermal Conductivity)	Typically 0.25–0.42 W/(m·K) for the cured novolac epoxy layer
표면 마무리	Smooth high-build gloss or sealed slip-resistant broadcast finish, commonly gray
접합 유형	Primer and multi-coat novolac lining with stripe-coated penetrations, coved upstands and chemically sealed joints
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Smooth high-build or aggregate-broadcast finishHorizontal floor and vertical containment liningIntegral cove, plinth and trench protectionAlternative novolac or vinyl-ester resin for specific chemical exposure

Planning a Chemical-Resistant Novolac Epoxy Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.