Negative pressure weighing booth complete three-quarter view with open front and rear returns

業界特有のクリーンルーム機器

負圧計量ブース

An open-front downflow booth that combines HEPA-filtered vertical air supply with low-level returns and slight negative pressure for cleaner powder weighing and dispensing.

Vertical HEPA Downflow
Low-Level Dust Capture
Open-Front Access
Monitored Negative Pressure

見積もりリクエスト製品案内

商品紹介

The negative pressure weighing booth forms a localized clean-air zone around balances, containers and manual dispensing work. Filtered air descends from the overhead diffuser and carries liberated particles toward low-level rear returns, while a controlled exhaust fraction keeps the booth below the surrounding room pressure. Stainless interior panels, flush lighting and accessible filter sections support cleaning and routine airflow verification.

主要な特徴

Uniform downward airflow moves airborne powder away from the operator breathing zone.

Three low rear returns capture particles close to the work surface.

Partial exhaust establishes inward flow across the open booth face.

A flush control screen displays fan, pressure and filter-condition information.

お客様の製品に関する懸念事項

Manual weighing can release fine powder at the balance and container rim, creating operator exposure and cross-contamination risks.

Dust can rise into the operator breathing zone during pouring.Vertical filtered downflow sweeps particles toward returns below the working height.

An open work face can allow powder to escape into the cleanroom.A controlled exhaust fraction maintains inward air movement across the booth opening.

Obstructed returns create unstable airflow around equipment.Multiple low-level grilles spread capture across the rear wall and simplify placement planning.

Filter loading may go unnoticed between service intervals.Differential-pressure monitoring provides a visible indication of changing filter resistance.

典型的な用途

Raw-material weighing and dispensingAPI sampling and subdivisionPowder container chargingPharmaceutical compounding support

技術的なパラメータ

Typical configurable construction values for an open-front pharmaceutical weighing booth are listed below.

コア材料	304 stainless-steel enclosure with HEPA terminal filters and perforated supply diffuser
パネルの厚さ	50-100 mm insulated plenum and wall sections
有効幅	1400-3000 mm clear working width
最大長さ	Up to 4000 mm overall booth length
鋼鉄の厚さを直面する	1.0-1.5 mm stainless interior facing
コア密度	35-45 kg/m³ for insulated wall and plenum fill
熱伝導率	0.035-0.045 W/(m·K) for insulated enclosure sections
表面仕上げ	Brushed or satin stainless interior with smooth sealed joints
ジョイントタイプ	Sealed modular wall and plenum joints with open-front pressure boundary and low-level return grilles
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integrated weighing table or floor scale recessSafe-change exhaust filtrationAlternative booth widths and depthsAirflow, pressure and particle monitoring interfaces

Planning a Negative Pressure Weighing Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する