Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
V-Bank
A compact gas-phase filter arranging multiple activated-carbon cells in a V pattern to increase adsorbent area and capacity within a 292 mm HVAC frame.
- V-Cell Adsorbent Geometry
- High-Airflow Format
- High Carbon Exposure Area
- Rigid Corrosion-Resistant Frame
Introduction de produit
The V-bank activated carbon filter uses several bonded-carbon pleat packs or restrained loose-fill adsorbent cells mounted at alternating angles within a deep rigid frame. The V geometry increases exposed media area and reduces face velocity through each cell, giving more contact opportunity than a shallow panel. A molded polymer, galvanized-steel or stainless-steel frame supports the loaded adsorbent and includes a standard header gasket. Broad-spectrum carbon addresses mixed odors and VOCs, while impregnated carbon or activated-alumina blends can target specific acid, base or oxidizing gases.
Key Features
Lower velocity through each cell improves adsorbent contact while controlling filter resistance.
Rigid supports prevent loaded carbon panels from sagging or separating from the header.
Individual adsorbent formulations can target broad VOC mixtures, acid gases, bases or ozone.
Préoccupations du client produit
High-airflow systems need meaningful molecular-media area, but a deep granular bed may be too heavy or require a dedicated housing.
A shallow carbon panel has insufficient media exposure at high face velocity.Multiple angled cells expand the active area and reduce velocity through each adsorbent section.
A conventional deep-bed carbon bank is too heavy for the existing filter rack.The modular V-cell format distributes media in a lighter drop-in cartridge.
Loose carbon settles away from the top of vertical cells.Bonded media or vibration-filled restrained cells maintain a more even adsorbent distribution.
One carbon grade is ineffective against the dominant process gas.Broad-spectrum, acid-gas, base-gas or oxidant-targeted media can be selected by contaminant family.
Les applications typiques
High-airflow make-up air unitsCommercial and industrial odor controlCleanroom recirculation systemsData-center corrosion protectionOutdoor-air pollution reduction
Paramètres techniques
Typical construction ranges for V-bank activated-carbon filters are listed below.
| Matériaux de base | Bonded activated-carbon media or restrained granular carbon and impregnated adsorbent cells |
|---|---|
| Panneau épaisseur | 292–305 mm overall V-bank depth |
| Largeur effective | 287–610 mm nominal face width |
| Longueur maximale | Up to 610 mm nominal face height |
| Acier face épaisseur | 0.6–1.0 mm galvanized or stainless-steel header and cell supports when specified |
| Densité Core | Approximately 400–650 kg/m³ bulk density for granular carbon or blended molecular media |
| Conductivité thermique | Approximately 0.10–0.30 W/(m·K) for the dry activated-carbon adsorbent bed |
| surface finie | Black molded polymer, mill-galvanized steel or corrosion-resistant stainless frame |
| Type joint | Nominal header frame with continuous closed-cell perimeter gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Bonded sheet or loose-fill carbon cellsBroad-spectrum or chemically impregnated mediaPolymer, galvanized or stainless frameParticulate prefilter layer for combination duty
Planning a V-Bank Activated Carbon Filter specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
