Complete SUS 304 stainless steel cleanroom air shower on a white background

Equipement de décontamination du personnel et du matériel

SUS 304 en acier inoxydable douche à air

A corrosion-resistant personnel air shower with exposed SUS 304 surfaces for hygienic cleaning in moisture-prone food, pharmaceutical and cosmetic areas.

SUS 304 Hygienic Surfaces
Corrosion-Resistant Interior
Smooth Cleanable Corners
Filtered Garment Jets

Demander un devis. Browse les produits

Introduction de produit

The stainless steel air shower uses SUS 304 for the visible chamber surfaces, doors, return grilles and nozzle faces. Its satin or hairline finish is wipeable and non-flaking, while radiused internal trims reduce crevices where moisture or debris can remain. Behind the hygienic liner, the recirculation system supplies filtered air through adjustable stainless nozzles.

Key Features

Exposed SUS 304 surfaces resist moisture better than ordinary painted mild steel.

Smooth sealed seams reduce dirt-retaining crevices in the occupied chamber.

Stainless nozzle faces and grilles tolerate frequent wipe-down.

A separated service plenum keeps filters and electrical parts outside the hygiene zone.

Compatible stainless hardware helps prevent staining on visible surfaces.

Préoccupations du client produit

Wet sanitation and humid process conditions demand a shower enclosure that remains smooth, corrosion resistant and easy to inspect.

Painted panels chip or blister under repeated sanitation.SUS 304 exposed sheet provides a durable cleanable surface without a paint film.

Sharp seams retain moisture and cleaning residue.Flush joints and radiused trims reduce internal ledges.

Wipe-down water reaches service components.A partitioned service plenum separates controls, motors and filters from the chamber interior.

Mixed-metal fasteners leave stains on stainless panels.Compatible stainless hardware and controlled finishing minimise galvanic marks.

Les applications typiques

Food and beverage entrancesPharmaceutical washdown-adjacent roomsNutraceutical productionCosmetics filling areas

Paramètres techniques

Typical material and dimensional ranges for a hygienic stainless air shower are listed below.

Matériaux de base	SUS 304 chamber and door construction with insulated backing, stainless nozzles, prefilters and H13 HEPA recirculation
Panneau épaisseur	50 mm hygienic insulated enclosure panels
Largeur effective	800-1500 mm clear cleanable passage width
Longueur maximale	Up to 3000 mm modular stainless chamber length
Acier face épaisseur	1.2-1.5 mm SUS 304 exposed facing
Densité Core	45-70 kg/m³ moisture-resistant insulation infill
Conductivité thermique	0.027-0.037 W/(m·K) for the selected hygienic panel core
surface finie	SUS 304 No. 4 hairline or satin finish with smooth sealed internal corners
Type joint	Flush stainless panel seams with hygienic sealant and compatible interlocked door hardware
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

SUS 304 or SUS 316L exposed surfacesViewing panel and low-UV LEDFloorless or checker-plate floorSwing or automatic hygienic doors

Planning a SUS 304 Stainless Steel Air Shower specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe