Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Lumière jaune faible UV
A yellow safe-light fixture configured to suppress ultraviolet and short-blue output around light-sensitive materials.
- UV-Suppressed Output
- Yellow Safe-Light Spectrum
- Filtered Optical Assembly
- Cleanroom-Sealed Body
Introduction de produit
The low-UV yellow light combines a selected LED spectrum with an optical filter that blocks residual ultraviolet and short-blue energy. It is intended for processes whose sensitivity extends below the visible amber region or where a broader yellow working light is preferred. The filter is captured behind a sealed smooth window, protecting it from abrasion and chemical contact during routine cleaning.
Key Features
A protected filter layer is isolated from direct wiping and chemical splash.
The yellow output offers usable visual contrast for manual handling tasks.
The sealed body maintains the same cleanable geometry as adjacent white fixtures.
Replaceable optical modules allow the spectrum to be selected for the actual material response.
Préoccupations du client produit
Materials can respond differently to ultraviolet, violet and blue energy, so a generic yellow appearance does not define a safe spectrum.
A tinted cover lacks data on its UV transmission.A defined source-and-filter combination targets the unwanted short-wavelength band.
Cleaning scratches an exposed filter and creates bright leakage points.The filter remains protected behind a smooth sacrificial optical window.
Extremely narrow amber light reduces visual color discrimination.A broader yellow spectrum can balance material protection with operator visibility.
Different photo-chemistries need different cutoff behavior.Interchangeable spectral modules match the selected process sensitivity.
Les applications typiques
Semiconductor resist roomsPhotosensitive adhesive handlingOptical coating preparationUV-sensitive polymer processing
Paramètres techniques
Typical configurable construction ranges for a low-UV yellow cleanroom light are listed below.
| Matériaux de base | Sealed metal housing with low-UV LED source, spectral filter layer and clear protective polycarbonate window |
|---|---|
| Panneau épaisseur | 55-125 mm complete filtered luminaire depth |
| Largeur effective | 120-620 mm exposed optical width |
| Longueur maximale | Up to 1500 mm complete fixture length |
| Acier face épaisseur | 0.8-1.2 mm powder-coated sheet-steel housing |
| Densité Core | Approximately 1200-1400 kg/m³ for the polymer filter and protective window assembly |
| Conductivité thermique | 0.20-0.30 W/(m·K) for the polymer optical stack |
| surface finie | Smooth white enclosure with yellow luminous face and protected internal spectral filter |
| Type joint | Gasketed protective window with captive frame and sealed replaceable filter module |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Different spectral cutoff filtersYellow-only or white/yellow circuitsRecessed or surface housingDimmable low-UV driver
Planning a Low-UV Yellow Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
