Integrated stainless steel hand wash dry and sanitizing station

Equipement de décontamination du personnel et du matériel

Station intégrée de lavage, séchage et désinfection des mains

A single stainless steel station that presents touchless hand washing, drying and sanitizing in a defined entry sequence.

Three-stage hand hygiene route
Touchless wash controls
Enclosed drying module
Separated wet and sanitizer circuits

Demander un devis. Browse les produits

Introduction de produit

The Integrated Hand Wash, Dry and Sanitizing Station places the hand-hygiene steps in one linear cabinet. Touchless soap and water outlets serve the wash stage, a drying module removes residual moisture, and enclosed hand ports provide the selected sanitizer at the final stage. The wet zone, air-drying or paper-drying section and solution reservoir areas are separated within the unit to make routine service more orderly.

Key Features

The three stages are arranged in a clear wash, dry and sanitizing sequence.

Touchless soap and water outlets reduce the need for users to touch wash controls.

A dedicated drying module can be configured for filtered air or paper towels.

Separate tubing and service compartments keep wash and sanitizer supplies apart.

The final module can provide a completion output to compatible entry equipment.

Préoccupations du client produit

Separate wash, dry and sanitizer units can create unclear traffic flow and make it easy for users to miss a stage.

Personnel move from rinsing to the entrance with wet hands.The central drying stage is physically positioned between wash and sanitizing modules.

Unlinked devices create queues and crossing movement in a small airlock.A single linear cabinet provides one clearly ordered hygiene route.

Wash and sanitizer supplies are confused during refilling.Separated service compartments and fluid circuits identify each supply route.

A connected entrance needs to know whether the station sequence has finished.The control arrangement can deliver a completion output after the configured stages.

Les applications typiques

Food and beverage clean productionPharmaceutical personnel entryMedical manufacturing hygiene roomsCosmetic filling facilitiesBiotechnology changing suites

Paramètres techniques

The number of lanes, drying method and module order can be matched to throughput and the planned hygiene sequence.

Matériaux de base	SUS304 cabinet with stainless wash basin and enclosed drying and sanitizing modules
Panneau épaisseur	1.2–1.5 mm stainless steel enclosure panels
Largeur effective	600–1000 mm operator working width
Longueur maximale	1800–2800 mm overall station length
Acier face épaisseur	1.2–1.5 mm SUS304
Densité Core	7900–8000 kg/m³ for stainless steel
Conductivité thermique	14–16 W/(m·K) for stainless steel
surface finie	Brushed SUS304 with seamless basin and enclosed drying hand ports
Type joint	Continuously welded wet-zone cabinet with gasketed utility service panels
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Filtered-air or paper-towel dryingSingle or two-lane layoutHeated-water supplyCompletion relay for connected equipment

Planning a Integrated Hand Wash, Dry and Sanitizing Station specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe