Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Swabs
Precision cleanroom swabs with a thermally bonded knitted-polyester head and rigid polypropylene handle for controlled cleaning of slots, sensors and small components.
- Knitted polyester head reaches narrow equipment surfaces without exposed adhesive
- Thermally bonded construction limits contaminating components
- Rigid polypropylene handle provides accurate pressure and placement control
Introduction de produit
Cleanroom Swabs combine a low-lint continuous-filament polyester head with a smooth polypropylene handle. Thermal bonding secures the fabric without exposed glue or metal staples. The rectangular head offers flat wiping faces and defined edges for cleaning recessed equipment features, while the long rigid handle keeps fingers away from the contact area.
Key Features
Rectangular head provides broad faces and controlled corner access
Thermal bond avoids exposed adhesive at the working end
Polypropylene handle is lightweight, rigid and chemically compatible
Several head geometries and handle lengths can match equipment features
Préoccupations du client produit
Small slots, optical recesses and sensor surfaces are difficult to clean with a full-size wipe. An unsuitable swab can leave cotton fibers, adhesive residue or excessive solvent in the feature.
Fibrous heads may shed into narrow assemblies.Use a knitted continuous-filament polyester head for critical surfaces.
Exposed glue can soften in common cleaning solvents.Select thermally bonded head construction without exposed adhesive.
A flexible handle may not deliver controlled wiping pressure.Match polypropylene handle stiffness and length to the reach required.
The wrong head size may miss corners or become trapped in a recess.Choose head width, thickness and profile from the actual feature geometry.
Les applications typiques
Used for cleaning print heads, optical components, grooves, validation points, disk-drive assemblies, sensors, sampling ports and other small equipment features in semiconductor, pharmaceutical, electronics and medical-device facilities.
Paramètres techniques
The following ranges cover common rectangular-head polyester cleanroom swabs. Final head dimensions, handle length, cleanliness and packaging depend on the equipment geometry, solvent and contamination-control plan.
| Matériaux de base | Knitted continuous-filament polyester head with polypropylene handle |
|---|---|
| Panneau épaisseur | 3–8 mm |
| Largeur effective | 3–17 mm |
| Longueur maximale | 165 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 60–100 kg/m³ apparent head density |
| Conductivité thermique | 0.04–0.10 W/(m·K), assembly dependent |
| surface finie | White low-lint knitted head with smooth light-green handle |
| Type joint | Thermally bonded head-to-handle neck |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Rectangular, pointed or paddle headSeveral head widths and thicknessesFlexible or rigid polypropylene handleAlternative handle lengthsCleanroom bagged or double-bagged supplyDry or pre-saturated format
Planning a Cleanroom Swabs specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
