Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Enclosure d'imprimante Cleanroom
A compact gasketed 316L stainless housing that contains a desktop or label printer while preserving quick access to printouts and consumables.
- Gasketed 316L stainless housing
- Clear printer viewing window
- Pull-out internal printer tray
- Separate print retrieval hatch
Introduction de produit
The cleanroom printer enclosure places a commercial label or desktop printer inside a smooth 316L stainless cabinet. A clear front window lets operators check status without opening the main door, and a smaller output hatch limits the opening needed to collect printed material. The printer sits on a pull-out stainless tray so paper rolls, labels and cartridges can be replaced from the front. Rear cable glands separate power and data entry points, while a compact air-circulation module can be added when the printer produces significant heat during long print runs.
Key Features
The dedicated output hatch allows printed labels or documents to be removed without exposing the complete printer bay.
A pull-out equipment tray brings the printer forward for media changes and maintenance without lifting it through the enclosure opening.
Separated rear cable glands keep power and communication entries restrained and prevent loose leads from passing through the door seal.
Préoccupations du client produit
Desktop printers generate particles, require frequent media access and contain vents and cavities that are difficult to clean in controlled areas.
The printer's paper path, fan openings and internal mechanisms are directly exposed to the surrounding controlled area.The gasketed stainless cabinet creates one smooth external boundary around the complete printer.
Opening a large service door for every printout repeatedly exposes the equipment bay.A separate small output hatch provides routine document retrieval while the main door remains closed.
Replacing paper or labels inside a fixed enclosure requires awkward lifting and poor access to the printer rear.The stainless pull-out tray presents the complete printer for loading and cable inspection.
Unrestrained power and data cables compromise the door seal and create snag points behind the enclosure.Dedicated rear glands retain and separate each connection before the leads enter the printer bay.
Les applications typiques
Cleanroom label printingPharmaceutical production documentationMedical-device work-order printingControlled laboratory sample labelingHygienic packaging-line print stations
Paramètres techniques
Typical configurable specifications for a stainless cleanroom printer enclosure are listed below.
| Matériaux de base | 316L stainless steel enclosure with a clear polycarbonate viewing window and blue silicone or EPDM perimeter seals |
|---|---|
| Panneau épaisseur | 1.2–1.5 mm enclosure wall panels |
| Largeur effective | 380–550 mm usable printer-bay width |
| Longueur maximale | 650 mm maximum enclosure depth |
| Acier face épaisseur | 1.2–1.5 mm 316L stainless outer shell and access panels |
| Densité Core | 7950–8050 kg/m³ for the 316L stainless enclosure |
| Conductivité thermique | 14–16 W/(m·K) for 316L stainless steel |
| surface finie | Brushed 316L stainless exterior with clear polycarbonate glazing and blue sanitary seals |
| Type joint | Gasket-compressed front door with concealed hinges, independent output hatch, pull-out tray and sealed rear cable glands |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Internal air-recirculation fanFiltered exhaust module for particle-producing printersWall, worktop or freestanding support mountPrinter-specific media opening and cable-gland layout
Planning a Cleanroom Printer Enclosure specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
