Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom équipement pièces de rechange
Cleanroom Door Closer
A compact black rack-and-pinion hydraulic closer that returns a cleanroom swing door at controlled speed while providing a positive final approach to the seals and latch.
- Compact Rack-and-Pinion Body
- Independent Speed Adjustment
- Two-Segment Link Arm
- Non-Handed Mounting Options
Introduction de produit
The cleanroom door closer is a surface-mounted hydraulic control installed on a single-action swing door or its frame. A spring-loaded rack drives the top pinion as the door closes, while hydraulic oil passes through regulating valves to moderate the sweep and final approach. The articulated two-segment arm transfers this motion between the closer spindle and a compact frame shoe. A smooth coated cover limits exposed recesses on the visible body, and the closing force, arm geometry and mounting position are selected to suit the actual leaf width, mass, hinge arrangement, seal compression and locking hardware.
Key Features
Separate regulating valves allow the main closing movement and final latch approach to be balanced without changing the arm length.
The two-piece articulated arm accommodates common door-leaf, frame and parallel-arm mounting geometries for left- or right-hand operation.
A matte-black removable cover and matching arm provide a durable low-glare finish that remains visually distinct on light cleanroom doors.
Préoccupations du client produit
Reliable cleanroom door return requires enough closing energy to compress the perimeter seal and engage the latch, but excessive speed or force can damage hardware and disturb controlled access.
A closer selected without the leaf width and mass can feel heavy to open or fail to pull the door fully onto its seals.The closing-force range is matched to the measured leaf size, construction, hinge friction and required gasket compression.
A fast final swing causes impact noise, loosens fittings and can rebound before a magnetic lock or latch engages.The sweep and latch-stage valves are adjusted independently to slow travel while retaining a positive final approach.
Incorrect spindle, arm or shoe positioning creates binding and reduces the available opening angle.Mounting geometry is laid out for the selected door-side, frame-side or parallel-arm arrangement before drilling.
Routine cleaning or maintenance can alter valve settings or leave mounting screws loose.Recessed adjustment points and accessible cover fasteners support controlled setting checks and periodic hardware inspection.
Les applications typiques
Cleanroom personnel swing doorsAirlock and gowning-room doorsLaboratory controlled-area doorsProcess-room service and corridor doors
Paramètres techniques
The following ranges cover common adjustable surface-mounted rack-and-pinion closers for single-action cleanroom doors; final force and arm selection depend on the complete door assembly.
| Matériaux de base | Die-cast aluminum body with steel rack, pinion, spring, spindle and articulated link arm |
|---|---|
| Panneau épaisseur | 44-60 mm nominal closer-body depth |
| Largeur effective | 55-70 mm nominal closer-body height |
| Longueur maximale | Up to 290 mm closer-body length excluding the articulated arm |
| Acier face épaisseur | 2.0-4.0 mm nominal steel link-arm section thickness |
| Densité Core | Approximately 2700 kg/m³ for the die-cast aluminum housing |
| Conductivité thermique | Approximately 160-205 W/(m·K) for representative aluminum housing alloys |
| surface finie | Matte-black powder-coated body cover, arm and two-hole frame shoe |
| Type joint | Hydraulic rack-and-pinion spindle with two-segment pivot arm and bolted two-hole frame shoe |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Matched adjustable closing-force rangeLeft- or right-hand mounting layoutRegular, parallel or frame-side arm geometryBlack, silver or white surface finish
Planning a Cleanroom Door Closer specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
