Three-quarter view of a complete white cleanroom cleaning brush

Vêtements de salle blanche, EPI et consommables

Cleanroom Cleaning Brush par

White hand-held cleanroom cleaning brush with a smooth molded polypropylene body, synthetic PBT bristles and an integrated hanging aperture for controlled-area surface cleaning.

Smooth molded polymer body supports routine wash-down and visual cleanliness checks
Dense white synthetic bristles provide controlled mechanical action without a natural-fiber core
Integrated hanging aperture helps the brush drain and remain segregated between cleaning zones

Demander un devis. Browse les produits

Introduction de produit

The Cleanroom Cleaning Brush is a compact manual tool for removing adhered residue and loose soil from accessible equipment surfaces, benches, containers and cleanroom support areas. Its one-piece white polypropylene handle and brush block present smooth, easy-to-inspect surfaces, while densely trimmed polyester PBT filaments supply repeatable scrubbing action. A curved handle transition keeps the working head clear of the operator's fingers, and the oval hanging aperture supports organized storage after cleaning and drying.

Key Features

White polypropylene body makes visible residue easier to detect during inspection

Synthetic PBT filaments resist moisture and provide consistent bristle recovery

Dense rectangular bristle field distributes hand pressure across the working area

Rounded molded edges reduce dirt-trapping corners on the handle and brush block

Integrated hanging aperture supports drainage, drying and zone-controlled storage

Préoccupations du client produit

Manual cleaning tools used near controlled production must remove soil without introducing natural fibers, damaged wooden surfaces or poorly cleanable joints. They also need a size, bristle stiffness and storage method that fit the target surface and the site's cleaning procedure.

Natural-fiber or wooden brushes can shed, absorb liquid and become difficult to inspect.Use a molded polymer body with synthetic PBT filaments for a non-wood, moisture-resistant construction.

Bristles that are too soft or too aggressive may not match the residue or surface finish.Select soft, medium or stiff filament trim according to the soil load and surface compatibility assessment.

Crevices around the brush block can retain detergent, soil or rinse water.Specify smooth rounded body geometry and rinse the bristle-root area as part of the documented cleaning cycle.

Uncontrolled storage can allow a brush to contact the floor or migrate between cleaning zones.Assign brushes by area or color and suspend them through the integrated aperture after washing and draining.

Les applications typiques

Suitable for controlled cleaning of stainless-steel benches, equipment guards, small containers, carts, utility surfaces, corners and other accessible areas in pharmaceutical production, biotechnology facilities, medical-device manufacturing, laboratories, electronics cleanrooms and cleanroom support spaces.

Paramètres techniques

The ranges below cover common hygienic hand brushes used for controlled-environment support cleaning. Overall length, brush-head width, filament stiffness, trim length, body color and packaging can be selected for the intended surface, chemistry and segregation plan.

Matériaux de base	Injection-molded polypropylene handle and brush block with polyester PBT bristle filaments
Panneau épaisseur	10–20 mm molded brush-block thickness
Largeur effective	35–80 mm brush-head width
Longueur maximale	150–330 mm overall brush length
Acier face épaisseur	0 mm; no steel facing used
Densité Core	900–1,400 kg/m³ component-material reference range
Conductivité thermique	0.12–0.30 W/(m·K) polymer reference range
surface finie	Smooth white molded body with densely trimmed white synthetic bristles
Type joint	PBT filament tufts mechanically anchored in a one-piece molded brush block
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Soft, medium or stiff PBT filament trimAlternative overall lengths and brush-head widthsWhite or zone-identification body colorsShort or extended handle configurationsIndividual or cleanroom-compatible bagged packagingDedicated labels or storage assignments for cleaning-area segregation

Planning a Cleanroom Cleaning Brush specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe