Votre fournisseur à guichet unique pour les équipements de salle blanche et les essentiels des installations aseptiquesSoutien international aux projets
Open mobile navigationClose mobile navigation
Meubles de salle blanche et produits en acier inoxydable

Cabinet de sécurité chimique par

A bright-yellow double-wall welded steel cabinet with spill-control shelves, a leak-retaining sump and three-point latching doors for segregated compatible liquid containers.
  • Double-wall welded steel body
  • 38 mm insulating air cavity
  • 51 mm leak-retaining sump
  • Three-point latching twin doors
Demander un devis. Browse les produits

Introduction de produit

The chemical safety cabinet uses two welded galvanized-steel skins separated by a 38 mm closed air space. Two adjustable galvanized shelves include raised edges and a slight rearward slope to direct incidental liquid toward the 51 mm lower sump instead of the door threshold. Twin doors engage a three-point latch at the top, bottom and center, while recessed paddle handles remain clear of the aisle. Two capped ventilation ports with internal flame-arresting mesh, a grounding stud and four adjustable feet are integrated into the cabinet body. The bright-yellow epoxy-polyester finish provides immediate visual identification and protects both internal and external steel surfaces.

Key Features

The welded double-wall shell places a continuous 38 mm air cavity between stored containers and the outer cabinet surface.

Adjustable raised-edge shelves guide small spills toward the back rather than allowing liquid to run toward the doors.

A 51 mm liquid-tight lower sump retains leakage below the lowest storage level and leaves the door sill visibly raised.

Three-point door latching, capped vents, an external grounding stud and leveling feet are built into one freestanding enclosure.

Préoccupations du client produit

Compatible liquid containers need visible segregation, controlled spill retention and doors that remain securely latched during routine storage.

Leaking containers allow liquid to reach the aisle before the spill is noticed.Raised shelf edges and the 51 mm liquid-tight bottom sump retain leakage inside the cabinet footprint.
Ordinary single-skin cupboards provide no separated outer barrier around stored liquids.Two welded steel walls enclose a continuous 38 mm insulating air cavity around the storage compartment.
A single central catch can leave the top or bottom of a tall door unsecured.The three-point latch engages the door at the header, sill and handle zone in one closing action.
Mixed chemical stocks are difficult to identify when cabinets share a neutral finish.The bright-yellow powder coat gives the liquid-storage cabinet a distinct visual identity for organized segregation.

Les applications typiques

Flammable solvent storage in production laboratoriesCombustible maintenance-liquid segregationPaint and coating material storesQuality-control chemical roomsClean manufacturing utility areas

Paramètres techniques

Typical configurable specifications for a welded double-wall chemical safety cabinet are listed below.

Matériaux de baseDouble-wall galvanized carbon-steel welded enclosure with 38 mm insulating air cavity, two adjustable spill-control shelves, grounding stud and 51 mm lower sump
Panneau épaisseur1.0 mm per inner and outer steel wall
Largeur effective1090 mm overall cabinet width
Longueur maximale1650 mm maximum overall cabinet height
Acier face épaisseur1.0 mm galvanized carbon steel for each cabinet wall and door skin
Densité Core7850 kg/m³ for the galvanized carbon-steel construction
Conductivité thermique45–60 W/(m·K) for the galvanized carbon-steel skins
surface finieBright-yellow chemical-resistant epoxy-polyester powder coat applied inside and outside, with silver galvanized shelves and black recessed handles
Type jointAll-welded double-wall shell with 38 mm sealed air cavity, three-point latching twin doors, 51 mm liquid-tight sump and dual capped ventilation ports
CustomisationDisponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Manual-close or self-closing door mechanismPolyethylene shelf trays and sump linerBlue corrosive-liquid finishUnder-bench or narrow vertical cabinet format

Planning a Chemical Safety Cabinet specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe
Email nous WhatsApp WeChat

Accueil

Produits

Actualités

À propos

Contact