Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Flooring Systemen
Epoxy-Bodenboden
A low-resistance epoxy floor build-up engineered to carry electrostatic charge rapidly through a conductive layer and dedicated earth points.
- Low-Resistance Path to Earth
- Carbon-Modified Wearing Layer
- Dedicated Earth Connections
- Chemical and Wear Resistance
Produkteinführung
Conductive epoxy flooring is intended for spaces where charge must move rapidly to a verified ground, including rooms with flammable vapor, combustible dust or sensitive high-energy processes. A bonded primer supports copper earth points, a black conductive primer equalizes the field, and a carbon-modified epoxy wearing layer completes the path. Compared with general antistatic flooring, the typical average resistance is lower. The layer sequence, grounding density and continuity across repaired cracks are therefore treated as functional parts of the system rather than optional accessories.
Key Features
Carbon fibers or conductive mineral additives provide through-thickness continuity after normal surface wear.
Dedicated earth points route charge into the approved building grounding network.
A smooth-textured epoxy finish balances cleaning access with practical traction in controlled industrial rooms.
Kunden Produktbedenken
Low resistance must remain continuous over the whole floor; cracks, isolated repairs or an incomplete conductive primer can interrupt the route to earth.
A spark from accumulated charge can ignite vapor or fine airborne powder.The low-resistance epoxy system conducts charge through the carbon-modified layer to dedicated earth points.
A repaired crack creates an electrically isolated strip across the room.Crack repair, conductive primer and grounding continuity are reinstated before the wearing layer is applied.
Black conductive primer shows through pinholes in a thin colored finish.Controlled consumption and full wetting of the wearing layer produce a closed, uniform colored field.
A highly smooth floor becomes slippery where occasional liquid is present.A calibrated fine texture can improve traction while preserving electrical contact and cleanability.
Typische Anwendungen
Solvent-handling clean areasBattery charging roomsPharmaceutical powder processingChemical laboratoriesExplosion-risk production zones
Technische Parameter
The ranges below describe a thin, smooth-textured conductive epoxy system for cementitious substrates.
| Core Material | Conductive epoxy primer and carbon-modified pigmented epoxy wearing resin |
|---|---|
| Panel Dicke | 0.6–0.8 mm nominal conductive coating system thickness |
| Effektive Breite | Typically 2000–3500 mm measured placement bay width |
| Maximale Länge | Typically up to 12000 mm electrically continuous run between movement joints |
| Stahl facing Dicke | 0 mm; carbon additives and copper earth strips replace any steel facing |
| Kerndichte | Approximately 1500–1700 kg/m³ for the mixed conductive resin layer |
| Thermische Leitfähigkeit | Typically 0.32–0.48 W/(m·K) for carbon-filled cured epoxy |
| Oberfläche Finish | Smooth-textured semi-gloss colored epoxy with optional restrained slip profile |
| Gemeinsamer Typ | Primer, copper earth point, conductive primer and conductive wearing coat; typical average resistance to ground 1 × 10⁵–1 × 10⁶ Ω |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Smooth or fine-textured conductive finishChemical-resistant conductive top layerAdditional grounding points for divided roomsCompatible conductive cove detail
Planning a Conductive Epoxy Flooring specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
