Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Phụ tùng thiết bị phòng sạch
Phòng sạch bánh xe bánh xe
A stainless steel swivel caster with a non-marking conductive TPU wheel, four-hole top plate and accessible side brake for mobile cleanroom equipment.
- Non-Marking Conductive TPU Tread
- Stainless Steel Swivel Fork
- Four-Hole Top-Plate Mount
- Single-Side Foot Brake
Giới thiệu Sản phẩm
This cleanroom caster wheel combines a deep blue-gray conductive TPU tread with a corrosion-resistant stainless steel swivel fork, top plate and axle hardware. The resilient tread rolls quietly and limits visible floor marking while the dark hub and sealed bearing interface keep the assembly compact. A square plate with four mounting holes spreads attachment loads into the equipment base, and the single side pedal provides an accessible wheel-braking interface. The swivel race is positioned directly beneath the plate to maintain maneuverability without an offset stem. Wheel diameter, load capacity, electrical resistance, plate pattern and brake function are selected for the actual cabinet, trolley or mobile process equipment rather than inferred from wheel color alone.
Các tính năng chính
Satin stainless steel fork, top plate and axle components provide a cleanable exterior with fewer painted surfaces exposed to routine wipe-downs.
The square top plate uses four separated corner holes to distribute mounting force and resist twisting at the equipment base.
One side-mounted foot pedal places the brake control beside the wheel while retaining clear access to the axle and swivel bearing interfaces.
Các mối quan tâm về sản phẩm của khách hàng
A caster that rolls smoothly in a workshop can still mark a controlled-area floor, accumulate charge, corrode during cleaning or loosen under a mismatched mounting pattern.
A hard or unsuitable tread can leave visible tracks, transmit vibration to instruments or damage resin flooring at small contact patches.A resilient non-marking TPU tread is selected with wheel diameter, hardness and load per caster matched to the floor finish and equipment mass.
Electrical charge can remain on mobile equipment when the wheel compound and floor path do not provide the intended dissipation route.Conductive tread formulation, hub-to-axle continuity and the installed floor system are evaluated together, with electrical resistance verified for the required application.
Painted or carbon-steel fork components may develop surface damage after repeated detergent wipe-downs or humid service.Stainless steel external hardware and an accessible open fork geometry reduce coating dependence and simplify visual cleaning checks.
An incorrect top-plate pattern, mounting height or brake sweep can interfere with the equipment base or produce unstable tracking.Plate size, four-hole centers, overall height, swivel radius, wheel width and pedal clearance are matched to the existing mounting envelope before installation.
Các ứng dụng điển hình
Mobile cleanroom workstations and instrument cartsStainless process trolleys and transfer racksPortable laminar-flow and inspection equipmentControlled-area cabinets and utility skids
Thông số kỹ thuật
The following conservative construction ranges describe medium-duty swivel casters used on cleanroom carts and mobile equipment; wheel compound, load, conductivity and fitting dimensions are selected for the installed duty.
| Vật liệu lõi | Conductive non-marking thermoplastic polyurethane tread on a conductive polymer hub with Type 304 stainless steel fork, top plate and axle hardware |
|---|---|
| Độ dày bảng điều khiển | 4.0-6.0 mm nominal stainless steel top mounting plate thickness |
| Chiều rộng hiệu quả | 32-50 mm nominal wheel tread width |
| Chiều dài tối đa | Up to 200 mm overall caster mounting height |
| Thép đối mặt với độ dày | 2.0-4.0 mm nominal stainless steel fork section thickness |
| Mật độ lõi | Approximately 1060-1120 kg/m³ for representative TPU tread compounds |
| Độ dẫn nhiệt | Approximately 0.20-0.25 W/(m·K) for representative TPU at 20 °C |
| Kết thúc bề mặt | Satin neutral-silver stainless steel, deep blue-gray non-marking conductive TPU tread and dark sealed hub and bearing interfaces |
| Loại khớp nối | Four-hole square top-plate swivel mounting with bearing race, single wheel axle and one side-mounted foot brake |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
75-150 mm nominal wheel diameterWheel brake or total-lock brake configurationAlternative top-plate size and hole centersConductive or low-marking tread formulation
Planning a Cleanroom Caster Wheel specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
